Product Name:

Product Name: Puxu Vacuum Pump Oil

Brand: German BUSCH

Model: VM100

Dimensions: 18L

Product Specifications:

Category:Vacuum Pump Oil

Viscosity coefficient:100

Brand:Puxu

Weight:0.86

Flash Point:260（℃）

40℃ kinematic viscosity:110（cSt）

Pour Point:-15（℃）

Model No.:VM100

Product Showcase:

Pux Technology Specifications Sheet:

Product Performance:

Excellent antioxidant and thermal stability, significantly extending the service life of the lubricant.

Low-carbon trend, effectively prevents the formation of胶质 and carbon slag.

Low vapor pressure and volatility ensure an appropriate vacuum level within the vacuum pump.

Excellent wear protection and good anti-foaming, air release properties.

Cautionary Notes:

Vacuum pump oil can maintain its quality for up to 3-5 years under sealed conditions; unopened, it is guaranteed for 3 months.

After the initial 500 hours of use, replace the pump oil. Thereafter, change the oil every 1000-1500 hours of operation. (Note: In harsh operating environments, observe the pump oil color regularly.)

Check the oil level gauge; replace the vacuum pump oil when the oil turns from amber to black or to milky white.

Selecting the appropriate vacuum pump oil will greatly benefit the pump's ultimate differential pressure, ultimate full pressure, startup, power consumption, pump temperature, stability of pump performance, and the lifespan of the vacuum pump.

Vacuum Pump Oil Change Procedure

Open the drain valve using the gravity method, raise the pump body oil tank to allow the old oil in the vacuum pump to automatically flow to the position of the rotating oil cap for draining. After the old oil is completely drained, inject a small amount of clean vacuum pump oil (100~500mL) from the vacuum pump oil filling point to flush the internal chamber. Then, operate the vacuum pump for about 1 minute, turn it off, and drain the newly injected oil. If the drained oil is still not clean, continue to inject new oil for flushing until it becomes clean.

Then, unscrew the drain valve, remove the oil filling cap from the filling hole, add new vacuum pump oil into the vacuum pump until the oil level reaches the oil mark, and then tighten the filling cap.

Our services

Product Selection Consultation - Vacuum System Customization - Vacuum Technical Consulting - Maintenance Service Contract - Extended Warranty Service