Vacuum Material Absorption Machine - How to Operate a Vacuum Material Absorption Machine

Automatic Material Absorption Machine Safety Operation Guidelines 1. Before turning on, check if the main unit's filter cover has a filter element and if the screws are securely tightened. 2. Check if the circuit is functioning properly before turning on. 3. Inspect the small material hopper for a filter screen and any foreign objects. 4. Connect the main unit to the small material hopper with a high-temperature tube before turning on. 5. After all checks are completed, connect the equipment to the storage bin and then turn it on for operation. Automatic Material Absorption Machine Fault Inspection 1. If the power indicator light does not illuminate during operation, the cause may be a blown fuse or a short circuit in the circuit. 2. If the air pump does not run, the power plug may be loose, the wiring may be incomplete, or the pump may be overloaded. 3. If there is no air output from the air pump, the pump may be running in the wrong direction, or the power wire connections may be out of sequence. 4. If the air pump runs but does not absorb material, it may be due to a blocked suction tube, a clogged filter screen, or air leakage.