Laboratory Ventilation Equipment
Laboratory Gas Pipeline Installat
Laboratory Gas Pipeline Design, C
Walk-in Fume Hoods, Freestanding
Multiple types of chemical and ph
Professional gas line installatio
Lab Bench, Full Steel Lab Bench,
Scientific Research Lab PP Lab Be
Lab Gas Cylinder Room Pipeline Installation Standards
1. Pipelines for conveying dry gases should be installed horizontally. Pipelines for conveying wet gases should have an incline of no less than 0.3% and slope towards the condensate collector.
2. Oxygen pipelines and other gas pipelines can be mounted on the same frame, with a spacing of not less than 0.25 meters. Oxygen pipelines should be located above other gas pipelines, excluding oxygen pipelines.
3. When laying pipes parallel to flammable gas pipelines, the distance between them must not be less than 0.50 meters. When crossing, the spacing should not be less than 0.25 meters. In layered layouts, the pipes should be placed above. Indoor pipes should not be laid in trenches or directly buried. Avoid passing through unsuitable rooms.
4. Gas pipelines should not be installed on the same frame as cables and wiring laid on-site.
5. Gases should be conveyed through seamless steel pipes. Pipes for gases with purity of 99% or higher should be made of stainless steel, copper, or seamless steel pipes.
6. The connection parts of pipes and equipment should be made with metal pipes. For non-metallic flexible hoses, polytetrafluoroethylene (PTFE) tubes and polyvinyl chloride (PVC) tubes should be used instead of rubber hoses.
7. Valve and accessories materials: Copper materials must not be used for gas pipelines. Other gas pipelines can be made of copper, carbon steel, malleable cast iron, and other materials.
