Anti-static Ceramic Tile Floor, Introduction to Anti-static Ceramic Tiles
Material
Particleboard substrate, anti-static ceramic surface layer, bottom of galvanized steel or aluminum plate, sealed with conductive rubber strips.
2. Full steel plate base material, anti-static ceramic surface layer, conductive rubber strip edging, with galvanized steel or aluminum plate as the bottom layer.
3. Calcium sulfate board base material, anti-static ceramic surface layer, zinc-plated steel sheet at the bottom, with electrostatically conductive PVC strips around the edges, offering better load-bearing capacity. It is edgeless for a more aesthetically pleasing installation.
This product is a static dissipative material, featuring stable system resistance and a range of benefits such as antistatic properties, high wear resistance, fire resistance, moisture resistance, a smooth and elegant surface, strong stain resistance, and even laying. It has been tested by the Static Dissipative Product Testing Center of the Ministry of Information Industry, and all performance criteria meet the required standards.
*Electrical Properties: System Resistance 10^-6 to 1x10^8 ohms, Static Discharge Voltage < 50 volts
*Mechanical Properties: Uniform load > 1000kg, Concentrated load > 200kg, Distortion < 2mm
* Aging Resistance: Life span of over 10 years
Standard Specifications: 600*600*40
Fire Resistance: National Grade A Fireproof Material
Three, the application scope can vary based on different usage environments, offering a variety of surface patterns to choose from. Additionally, the vitrified surface layer is a green building material suitable for general anti-static requirements and overhead ground requirements.
IV. Technical Parameters (Execution Standard GB/T36340-2018)
Anti-Static Ceramic Flooring
Brand: Win-Win Shenfei
Model: HDG-CQ, Specifications: 600*600*40
Face Material: 10mm thick, high-wear-resistant, antistatic ceramic tiles
Steel Plate: Top 0.6mm, Bottom 0.5mm
Material: SPCCLD Hard Plate Steel
Filling: High-strength foamed cement, additives
Beam: 565mm x 21mm x 30mm = 1.0 thick
Bracket: Top plate 3.0mm, Bottom plate 2.0mm
Concentrated Load: 200kg
Uniform Load Distribution: 1000kg/square meter
Fire Rating: Class A, non-combustible
Anti-static Ceramic Surface Activity Floor Technical Parameters
| Name | Small Orchid | Small yellow flower | PVC Patterns | Pure white | Beige |
Specs
（mm） | 600*600*40 | 600*600*40 | 600*600*40 | 600*600*40 | 600*600*40 |
Steel plate thickness
（mm） | Up 06/Down 05 | Top 06/Bottom 05 | Up 06/Down 05 | 06/05 below | Top 06/Bottom 05 |
Load
（KG） | 1,000 kg/sq. m | 1000 kg/sq. m | 1,000 kg/sq. m | 1,000 kg/sq. m | 1,000 kg/sq. m |
Bracket thickness
（mm） | Top 3, Bottom 2 | Up 3, down 2 | Up 3, down 2 | Up 3, down 2 | Up 3 down 2 |
Beam thickness
（mm） | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 |
Tile thickness
（mm） | 10 | 10 | 10 | 10 | 10 |
System Resistance
Ohms | 1 x 10^7-9 | 1*10^7-9
Power | 1 x 10^7-9 | 1x10^7-9
Power | 1e7-9 |
Description:
1. Standard installation height options range from 10 cm to 30 cm (10", 15", 20", 25", 30"), with uniform pricing. Other installation heights are available upon request, with prices to be negotiated separately.
2. Free samples offered, all samples from our company are complimentary; shipping fees apply separately. All costs incurred for viewing samples can be fully deducted from the final order payment.
3. The standard ratio of flooring, brackets, and beams is: 1 square meter of flooring requires 3.2 brackets, 5.2 beams, and 10.4 screws. Any additional items beyond the standard configuration must be purchased separately by the customer.
GRC network floor
Steel network flooring with wire grooves
Steel OA Network Floor
Anti-static ventilated floor
Aluminum alloy antistatic flooring
Wood-based antistatic floor
Calcium sulfate antistatic flooring
Full Steel Edgeless Anti-Static Flooring
Anti-static Steel Floor
