Seam Tape, Sand Surface Seam Tape, No Backing Seam Tape

One, Detailed Introduction to the Features of Sewing Tape - Taian Fangshuo Engineering Materials Co., Ltd.

(Shashui Road Seam Tape) (No-Backing Seam Tape) (Flat Seam Tape) (Convex Seam Tape) Road Seam Tape Specifications: Width - 2.5cm, 3cm, 4cm, 5cm, 6cm, 7cm, 8cm, 10cm, 12cm, 15cm, 20cm, 30cm, 50cm, 100cm; Thickness - 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5mm, 10mm. Softening Point: 85 degrees, Cold Resistance: Down to -40 degrees Celsius.

(Support customizing various types of seam tape) Non-cloth-backed seam tape, sand flat seam tape, sand convex seam tape, cloth-backed seam tape, double-sided adhesive seam tape, vertical adhesive seam tape, crack filler, sealant tape, compression tape. The product is easy to install, suitable for single-person operation. The product is resistant to friction and does not fall off, has strong surface adhesion, does not require fire for winter application, is soft and elastic, withstands low temperatures down to -40°C, has good self-adhesive properties. Peel off the release film and apply by hand, then firmly press with your foot. Sticks securely to the road surface, provides good sealing and waterproofing, does not fall off. The sand surface seam tape can bend freely with the road cracks, looks neat and tidy, allows flexible installation, and offers one-on-one service throughout the process.

Product Introduction

Our自主研发的 seam tape is a composite material specifically designed for road crack treatment. It boasts numerous advantages including excellent adhesion, strong tensile strength, excellent water-sealing properties, durability, and ease of application.

Two【Product Usage】

Treatments for various cracks in cement, asphalt pavements, and manhole covers, also applicable for pre-coating crack treatments and joint sealing before construction.

Three Construction Techniques

Select the specifications of the crack sealing tape based on the width of the road cracks, usually available in 3cm, 4cm, 5cm, and 8cm widths.

2. Clean the cracks, ensuring there are no significant bulges, dents, loose particles, gravel, or oil stains, greases, etc. visible.

3. Keep the crack surface clean and dry; it is recommended to fill the crack if its width or depth exceeds 1 cm.

4. Peel off the backing paper from the seam tape, with the non-adhesive side facing up, and lay the seam tape flat on the road surface, centered along the crack. For irregular cracks, follow the direction of the crack to apply the tape without needing to cut the seam tape.

5. When applying seam tape, it is recommended to gently walk over the tape surface in flat shoes to enhance the bonding strength between the tape and the original pavement.

6. Traffic can be reopened once the stitching of the seam is completed.

Cleanse cracks, apply self-adhesive tape, and firmly press with foot.

Four 【Product Advantages】

1. Easy installation and high efficiency: No machinery required; installation efficiency is over 10 times that of sealing cracks.

2. High Cost-Performance Ratio: The cost is about 80% of similar performance crack sealing construction.

3. Strong bonding capability: Can be tightly bonded with the road surface.