How to Install ALC Lightweight Partition Boards?

1. Preparations: Before installing the ALC panel, ensure the base surface is flat, sturdy, and dry, and remove any debris and dirt. The base surface must comply with relevant construction standards and specifications. 2. Installation Methods: ALC panels can be installed vertically or horizontally. For vertical installation, the panels are mounted vertically on walls or support structures; for horizontal installation, they are laid horizontally on the ground or roof structure. Installation should follow design requirements and manufacturer's instructions. 3. Fixing Methods: Fixing ALC panels can be done mechanically or with chemical bonding. Mechanical fixing typically involves using bolts, expansion bolts, or other appropriate fasteners to secure the panels to the support structure. Chemical bonding uses specialized adhesives to bond the panels to the base surface. Fixing methods must comply with relevant construction specifications and manufacturer requirements. 4. Joint Treatment: When installing ALC panels, leave appropriate expansion or contraction joints at the seams to allow for free movement of the panels due to temperature changes and structural deformation. Sealing materials can be used to seal the joints to prevent water and air penetration. 5. Fire Resistance Requirements: ALC panels must meet relevant fire resistance requirements during installation. This may include coating the panel surface with fire-retardant paint or using fire-resistant isolation layers to enhance the fire resistance of the panels. Fire resistance requirements should be operated according to local building codes and standards. 6. Tensile and Seismic Requirements: The installation of ALC panels must meet tensile and seismic requirements. This may involve using appropriate connectors, support structures, and reinforcement measures to ensure stability and safety of the panels under tensile and seismic forces. 7. Safety Measures: Appropriate safety measures should be taken during the installation of ALC panels, including wearing personal protective equipment, using safe tools and equipment, and adhering to relevant construction safety regulations and procedures. These are general installation specifications for ALC panels. Specific requirements may vary by region, building type, and design specifications. In practice, refer to relevant building codes, standards, and manufacturer guidelines to ensure compliance with applicable specifications.