Food Packaging Machines, Pet Food Production Lines, Extru...

Puffing Equipment Usage Method
⑴ The housing bearings should be timely lubricated with grease; after 500 hours of operation, the lubricating grease should be fully replaced. (New machines should be properly lubricated before operation, and the oil should be changed after 200 hours of operation.)
Other bearing components require regular lubricant replenishment.
③ It is strictly prohibited to use hard objects to hammer nuts, screws, and other wearing parts during disassembly and assembly. Also, it is forbidden to place heavy objects or have people stand on the expansion chamber.
Puffed materials should be sorted properly to prevent metal or other foreign objects from entering the machine and damaging the components.
Keep an eye on the quality of the膨化equipment, and pay attention to replacing wearable parts.
Maintain cleanliness around the equipment.
When the extruder is not in use for an extended period or when replacing the expanded material, the material inside the extrusion chamber should be scraped clean to prevent caking, mold growth, or cross-contamination between materials.
Due to the relatively faster wear of the wear parts near the discharge outlet, the wear parts near the feed inlet end wear less. Therefore, when replacing wear parts, it is advisable to start from the discharge end and replace them in sequence, rather than replacing multiple components at once.
www.114global.com © Zhongshang 114 Hebei Network Technology Co., Ltd.Address: Room 6009, Oriental New World Center, No.118 East Zhongshan Road, Qiaoxi District, Shijiazhuang City, Hebei ProvincePlatform Service Hotline: 4006299930
