Silicone Heat Transfer Printing Treatment Agent

Thermal conductive silicone has demolding properties and is difficult to adhere to pressure-sensitive materials like double-sided tape. Our company produces...Thermal Conductive Silicone Treatment AgentMW-225Effectively resolved this issue.,Ensures secure bonding between various double-sided adhesives and thermal silicone products..This treatment agent offers strong adhesion, non-stick silicone surface after processing, quick surface drying, foldable products after glue application, non-transferable glue, and excellent adhesion strength even in cold conditions in the north.

Thermal Conductive Silicone Treatment AgentPerformance

Appearance: Transparent, viscous liquid

Please provide the Chinese content to be translated.  Silicone Polymer, Curing Agent, Solvent

Environmental Protection: (ROHS,REACHBisphenolAHalogen, ortho-benzene

Thermal Conductive Silicone Treatment AgentApplication Scope

Thermal Conductive Silicone Treatment Agent MW-225 is widely used in thermal conductive silicone adhesive foot pads, thermal conductive silicone sheets, thermal conductive silicone strips, and various accessories.3MDouble-sided adhesive and sticker application.

Thermal Conductive Silicone Treatment AgentUsage Instructions

Clean the surface of the thermal silicone products free of oil, water, impurities, etc..

2.TranslateMW-225Coated on the surfaces of thermal conductive silicone products that require bonding.,(If needed, please apply twice),Place in a dry condition at room temperature for several minutes (usually)1-3Minute(s).

3.Apply double-sided adhesive and other pressure-sensitive papers to the treated surfacesMW-225Thermal conductive silicone products,Apply moderate pressure to the contacting surfaces.

4.Applicable3-5Within an hour, the intensity will reach70-80%.24In a few hours, intensity reaches high.If the temperature is too low or the silicone concentration is30If the temperature is 8 degrees or below, the curing time needs to be extended.

Thermal Conductive Silicone Treatment AgentStorage Method

Storage areas must be free from open flames, kept away from heat sources, and protected from static electricity, direct sunlight (excessive exposure), and violent impacts; maintain a safe distance from fire sources, acidic, alkaline substances, and flammable materials. Good ventilation is required, and the room temperature should be below 30℃ for storage; avoid room temperatures that are directly above...30℃Above will significantly reduce storage time. Keep out of reach of children!

Thermal Conductive Silicone Treatment AgentShelf Life: Unopened Container(≤30℃)Shelf life of storage6month

Thermal Conductive Silicone Treatment AgentPackaging: 3-15-20kg/bottle18Or27KG/Piece(s).