Spray-type silicone treatment agent

Silicone has demolding properties and is difficult to bond with pressure-sensitive adhesives like double-sided tape. This modelSpray paintingSilicone treatment agentMW-223Effectively resolved this issue.,Bond various double-sided adhesives and silicone products securely..MW-223Silicone surface treatment agents treated silicone surfaces are non-sticky, quick to dry, can be folded together after coating, do not transfer upon coating, do not become whitened, and have no stringing during spraying. Mainly used for various irregular silicone surface treatments, or large-area continuous operations, and maintains excellent adhesion strength even in cold conditions in the north.

Spray Silicone Treatment AgentPerformance

Appearance: Transparent viscous liquid

Composition: Silicon Polymer, Curing Agent, Solvent

Environmental Protection: (ROHS,)REACHBisphenolAHalogen, o-phenyl

Spray Silicone Treatment AgentApplication Scope

Spray-type silicone treatment agent MW-223 is widely used in silicone self-adhesive foot pads, silicone foam, thermal conductive silicone, automotive interiors, aerospace interiors, household electrical appliances, and sealing strips.LEDLED strips, children's interlocking blocks, silicone accessories, etc. for sticking3MDouble-sided tape, removable adhesive.

Spray Silicon Treatment AgentUsage Instructions

Clean oil, water, impurities, etc. from the surface of silicone products.

2.TranslateMW-223Coating or applying to the adhesive surfaces of silicone products,(If necessary, please apply twice),Leave to dry for several minutes at room temperature (usually)1-3Minute(s).

3. Apply pressure-sensitive adhesive papers such as double-sided tape onto the treated surfacesMW-223Silicone products,Gently apply pressure to the contacting surfaces.

4Applicable3-5Hours later, intensity reached70-80%.24Hours later, intensity reached high..If the temperature is too low or the silicone concentration is30If the temperature is 8 degrees or below, the curing time needs to be extended.

Silicone Coating Treatment AgentStorage Method

Storage areas must be free from open flames, kept away from heat sources, and protected from static electricity, direct sunlight (excessive exposure), and violent impacts; maintain a safe distance from fire sources, acidic, alkaline substances, and flammable materials. Good ventilation is required, and the room temperature should be kept below 30℃ for storage; avoid room temperatures that are directly above...30℃Above will significantly reduce storage time. Product is volatile; seal tightly after opening and any unused portion. Keep out of reach of children!

Silicone Coating Treatment AgentShelf Life: Unopened Container(≤30℃)Shelf life of storage6month

Silicone Coating Treatment AgentPackaging: 3-15-20kg/bag18Or27KG/Piece(s).