Double-cone mixer

The twin cone mixer has a W-shaped cylindrical mixing chamber, formed by tightly welding stainless steel plates. It uses mechanical transmission to make the material inside the twin cone chamber reciprocate and flip, achieving uniform mixing. The machine panel and mixing chamber are generally made of high-quality stainless steel, with polished inner and outer walls. There are no dead corners during mixing, no accumulation of material, high efficiency, and easy cleaning.

The twin cone blender is commonly used in industries such as food, chemical, metallurgy, and electronics for mixing two or more dry powder or granular materials. This equipment is suitable for blending powdery particles with good flowability and minimal physical differences. It is particularly ideal for products with small batch sizes that require thorough mixing without dead spots. Due to the smooth material flow within the twin cone blender, it does not damage the original shape of the material, making it also suitable for blending granular materials that are prone to breakage and wear.

For materials with slightly reduced fluidity, a rod-type stirrer can be added inside the drum, rotating at high speed in the opposite direction to the drum, ensuring effective uniform mixing of the materials.

Additionally, for materials requiring humidification, a spray humidification feature can be added. The spray volume is even, with no water droplets or material agglomeration occurring inside the cylinder. The spray power is provided by compressed air at 3 kg/cm².

Working Principle:

The machine features an electric motor and a reducer at one end. The motor's power is transmitted through the reducer and then via a drive shaft to continuously flip the double-conical drums, allowing the material inside the drum to mix vertically and horizontally.

Due to the rotational movement, the powdered or granular material in the inclined cylinder continuously alternates, splits, and merges; it randomly transfers from one zone to another, while particles slide against each other, resulting in multiple spatial superpositions. Particles continuously distribute on the newly formed surfaces, repeatedly lifting, sprinkling, interweaving, diffusing, and mixing, achieving a rapid uniform mixing effect. Moreover, as the cylinder continuously flips throughout the mixing process, all materials inside are in motion, ensuring a thorough mix without any dead spots.

Common Processes:

Mix two or more materials evenly through the combined action of mechanical force and material gravity. Suitable for processes such as mixing, disintegration, drying, and atomization of powders, granules, and other materials.

Mixed: Uniformly blend various dispersed systems to prepare a new material.

Disaggregate: To break up material that is clumped or aggregated.

Drying: Extracts moisture or solvents from materials by vaporizing and removing them through heating.

Spray liquid: Evenly add a small amount of water/solvent or solution to the material.

Application Products:

Food, intermediates, flavoring powders, coffee powder, flour, fragrances and flavors, graphite, magnetic materials, powder metallurgy, iron powder, ceramics, electronics, chemicals, plastics, rubber, dyes.

Component Parts:

Driving motors, reducers, bearings, drive shafts, double-conical cylinders, electrical control systems, frames, and other auxiliary components

Complete machine functions available:

Tank Volume: 100L-4000L (Custom for Large Volume)

Motor Power: 1.5kw-15kw

Power Supply: 380/400/415/440/480V; 50/60Hz; 3P

Motor Types: Standard, Explosion-proof, Variable Frequency

Energy Efficiency Grade: GB2 (IE3), GB3 (IE2)

Protection Rating: IP54, IP55, IP65

Work Environment: Room Temperature, Heated, Atmospheric Pressure, Vacuum

Speed Control Methods: Constant Speed, Variable Frequency Speed Control

Material Input: Manual feeding, vacuum loading

Manual Butterfly Valve

Material: 304, 316L, Sanitary Grade (Meets GMP specification requirements)

Operation Panel: Standard Button Cabinet, Explosion-Proof Button Cabinet (Increased Safety), Explosion-Proof Button Cabinet (Sparking Prevention)

Electrical Control: Relay Control

Typical Parameters:

Note:

The above typical parameters are measured with a medium of powder having a specific gravity less than 1g/cm³. Selection should be based on calculations of parameters such as the mesh size and specific gravity of the material.

Please specify your required processing capacity, equipment type, size requirements, or the characteristics of the material you need processed, as well as the process details.密斯克的销售工程师 will provide a satisfactory solution for you.

Key Features:

1. Attractive appearance, exquisite craftsmanship, grand and generous, with high visual appeal.

2. Free from mechanical compression and severe wear, the mixing of granules is less prone to breakage, ensuring the integrity of the material particles.

3. Equipped with a timing function, the cylinder can be set for automatic forward and reverse rotation at specified times.

4. Equipped with motor protection features, automatically shuts down in case of overload.

5. The entire unit can be made of sanitized stainless steel, with both the inner and outer surfaces polished to a mirror finish for easy cleaning and hygiene, meeting GMP compliance standards.

6. For materials with poor fluidity, an additional forced stirrer can be added.

7. Optional variable frequency drive and infrared sensor for automatic positioning.

For liquid addition operations, a spray system can be equipped.

9. Suitable for adding a jacket for material heating and drying or cooling.