TECNA Ammeter TE1600

TE1600Technical Specifications

Dimensions:100*190*50mm

Weight:0.5KG

Range: Alternating Current Average Value:(MRS. AC), 2KA-20KA-200KA

Peak Current Value for Communication(PEAK AC)，2.8KA-28KA-280KA

DC Current Average Current Value (RMS DC-CD)，2.8KA-28KA-280KA

Communication Welding Time (AC TIME)，99.5Welding Cycle Time

DC Welding Time (DC TIME)，1000Millisecondms）

Pressure  FORCEHigh (×)1), low (×)O.2）

Degree:  Average Current ValueRMS CLASS I

Degree:  Time  1Millisecond (DC)  0.5Frequency (AC)

Battery Life: 80-180Hour

Normal operating temperature: 5℃-40℃

Standard Working Height: Elevation2000Rice

Ingress Protection (IP) rating: IP40

Primary Functions:

1Measurable Direct Current (DC) CurrentDC)，Current (Current) and交流电流（AC）

2Measurable effective current valueRMS）

---Current value

---Average Current Value

3: Measurable wave welding time, with1/2Zhou Bo for***Small measurement range (AC)

4Measurable welding peak currentPEAK）

---High welding current

---Low welding current

5Measurable welding current angle

6Measurable effective direct current (DC) current value

----Value

---Average

7Measurable direct current welding time, in millisecondsms) )***Small quantity

8Measurable initial DC rise time

9Unstable welding waves at the start and end may be exempt from testing function

10At millisecond (ms)msTest DC current time in units of ), with a feature to disable measurement display.

11In millisecondsmsTest pressure duration in increments of ）, with a function to exclude display of measurements.

12Measurable AC and DC pulses

13Current display range is selectable2KA，20KA，200KA

14Pressure range available in high rangeHIGH），*1 Low range (LOW），*0.2

15Measurable welding machine pressure values, as well as pressure during welding and at the end stage

16Pressure units are available in metric and imperial systems.

17Memory can store recent displays.10Group test values

18：***Long10Minute without measurement will automatically shut down

19After automatic shutdown, stored with***Post-test value

20：BNCThe interface can be connected to an oscilloscope to display welding waveforms and current.

21This unit features an automatic sensor recognition function (such as automatic recognition of current detection coils and pressure sensor accessories, etc.).

22The machine is equipped with optional Italian, English, Spanish, German, and French.