Several Major Categories of Zhenxin Vibration Dampers for Cooling Towers

Product Alias: ZTF Adjustable Damping Spring Vibration Absorber

The springs are designed with a low-frequency value and are electrostatically coated for excellent weather resistance and effective shock absorption.

2. The top and bottom are equipped with non-slip, wear-resistant rubber and fixed bolts, significantly enhancing safety performance.

3. Easy installation with adjustable height and width to suit actual needs.

4. Effectively isolates the vibration of large power equipment such as chilled water units, cooling towers, heat pump units, and power generation units, while protecting and extending their service life.

Vibration Dampers -> Cooling Tower Vibration Dampers -> Damper Spring Vibration Dampers (ZTG Series)

Product Alias: Damping Spring Vibration Absorber (ZTG Model)

The ZTG type damping spring vibration damper features a simple structure and easy installation, with top and bottom fixed screws and bolt holes. By adjusting the horizontal height adjusting nuts on the top and bottom fixed installation screws, the damper's installation height can be adjusted. Additionally, it employs lateral damping blocks, increasing the vertical damping coefficient, and enhancing both longitudinal and lateral stiffness, ensuring the normal and safe operation of the equipment without the need for additional limiters. Suitable for active and passive vibration damping of mechanical equipment such as fans, air conditioning units, and chilled water units.

Vibration Dampers -> Cooling Tower Vibration Dampers -> ZT Type Damper Spring Vibration Damper

Product Alias: ZT Type Damping Spring Vibration Absorber

ZD Type Damping Spring Damper Characteristics:

The ZT type damping spring shock absorber, also known as a prestressed spring shock absorber, boasts the dual benefits of a low-frequency characteristic and high damping, eliminating the inherent resonance amplitude phenomenon of steel springs. This series includes 29 different specifications, with individual load capacities ranging from 15kg to 4800kg, corresponding to natural frequencies of 1.6Hz to 4.9Hz and a damping ratio of 0.065. The shock absorbers in this series offer a wide load range, are user-friendly, feature low natural frequencies, excellent vibration isolation, compact structures with small dimensions, easy installation and replacement, and are safe and reliable for use with a long service life and strong adaptability to working environments. They demonstrate significant effectiveness in active and passive vibration isolation, shock and impact vibration, and sound insulation through solids. They are an ideal choice for vibration isolation, noise reduction, vibration pollution control, and environmental protection.

The ZT-type damping spring isolator can be categorized into three types based on the installation method.

The ZT-type vibration dampener features anti-slip rubber pads on its upper and lower seats. For power equipment with minimal interference forces, the ZT-type vibration dampener can be directly placed under the equipment's base, allowing for free movement and adjustment of the center of gravity without the need for fixation.

2. The ZT-I model is a top-mounted fixed type.

The ZT-Ⅱ model can be mounted both vertically and horizontally to accommodate various installation requirements.

Vibration Dampers -> Cooling Tower Vibration Dampers -> Damping Spring Vibration Absorbers (ZTE Type)

Product Alias: Damping Spring Damper (ZTE Type)

Introduction to the Features of the Damping Spring Shock Absorber (Model ZTE)

1. Cast steel housing with alloy steel springs, coated with plastic for excellent weather resistance, effectively extending service life and providing excellent shock absorption.

2. The top and bottom are equipped with anti-slip, wear-resistant rubber and fixed bolts, significantly enhancing safety performance and ensuring easy installation.

3. Effectively isolates vibrations from various horizontal and vertical pumps, fans, air conditioning units, generator sets, diesel generator sets, pipelines, and other power equipment, thereby protecting and extending their service life.