Operators of CNC vertical lathes should pay attention to the following points during daily use:

CNC Lathe This is a high-precision, high-efficiency automated machine tool, primarily used for processing complex-shaped parts such as shafts, disks, and shells, etc. To ensure proper operation and extend its service life, operators should pay attention to the following points during daily use:

Operation Procedures

Preparation before operation

Operators must be familiar with the structure, performance, functions, and operational procedures, and must pass training before being eligible to perform operations.

(2) Inspect the integrity of all equipment components, ensure the lubrication system is functioning properly, and verify the electrical system's safety and reliability.

(3) Inspect that the cutting tools and fixtures are securely installed and meet the machining requirements.

(4) Inspect whether the workpiece is securely clamped and if the positioning is accurate.

(5) Verify the correctness of the check program and ensure the simulation runs normally.

No Chinese content provided.

Operate strictly according to the operational procedures to prevent any misuse that could lead to equipment damage.

Prior to equipment startup, the protective cover should be engaged to ensure personal safety.

(3) It is strictly prohibited to open the protective cover during equipment operation to avoid any danger.

During equipment operation, adjusting tools, fixtures, and other components is strictly prohibited.

(5) It is strictly prohibited to touch rotating workpieces and cutting tools with hands during the equipment operation.

(6) During equipment operation, if any abnormal conditions are detected, the machine should be immediately shut down and the power supply disconnected, with professional personnel conducting the inspection and repair.

Operation complete.

(1) Turn off the equipment's power and clean the surface of the device and its surrounding environment.

Inspect equipment and report any issues to the maintenance staff promptly.

(3) Keep detailed equipment usage records for future reference and maintenance.

Section II: CNC Vertical Lathe Maintenance and Care

Routine maintenance

(1) Clean the equipment daily and maintain a clean surface and surrounding environment.

(2) Inspect the lubrication system daily to ensure adequate oil supply and clear oil lines.

(3) Inspect the electrical system daily to ensure proper wiring connections and no leakage.

(4) Inspect the pneumatic system daily to ensure normal air pressure and unobstructed airways.

(5) Conduct daily inspections of the cooling system to ensure adequate coolant levels and clear piping.

Regular maintenance

We conduct a comprehensive equipment check every week and address any issues promptly.

(2) Perform a comprehensive maintenance on the equipment monthly, which includes cleaning, lubrication, and adjustments.

(3) Conduct a comprehensive equipment inspection quarterly and replace worn-out parts.

(4) Conduct a comprehensive annual maintenance of the equipment, inspecting the performance of all components to ensure the equipment remains in good condition.

Section 3: Safety Precautions for CNC Vertical Lathes

Familiarize yourself with the equipment's performance and operational procedures prior to operation to prevent safety accidents.

Always wear protective gear during operations, such as safety goggles and earplugs.

Avoid contact with hands, clothing, and other items with moving parts during operation to prevent danger.

During equipment operation, any maintenance or adjustment is strictly prohibited.

In the event of equipment malfunction, the machine should be immediately shut down and the power supply disconnected, with repairs conducted by professionals.