详情描述

Tubular Microfiltration Machine

Equipment Introduction

This equipment is a mechanical filtration device. It is suitable for various occasions requiring solid-liquid separation, such as urban domestic wastewater, papermaking, textile, dyeing and finishing, chemical wastewater, and other filtration. Micron filtration is a type of mechanical filtration method. It is used to maximize the separation of fine suspended particles from liquids, achieving the purpose of separating solid and liquid phases. The difference between microfiltration and other methods lies in the smaller pore size of the filtration medium, which, with the help of centrifugal force from the rotating screen, offers higher flowability under lower hydraulic resistance, trapping suspended solids.


Key Features

1. Simple structure, smooth operation, easy maintenance, and long lifespan.

2. High filtration capacity and efficiency, with a tiny suspended solids recovery rate of over 85% in wastewater.

3. Compact, cost-effective, low-speed operation, automatic protection, easy installation.

4. Fully automatic continuous operation; no need for专人 supervision; the concentration of filtered substances can reach over 12%.


Structure and Principle

A drum-type microfiltration machine is a mechanical filtration device consisting of main components such as a drive mechanism, overflow weir distributor, and flushing water system. The filter mesh is made of stainless steel. Its working principle involves feeding the treated water into the overflow weir distributor through a pipe, allowing it to flow out evenly from the outlet after a brief stabilization. The water is distributed over the filter tubes rotating in the opposite direction. The water flow generates a relative shearing motion with the inner wall of the filter tubes, achieving high water permeation efficiency. Solids are intercepted and separated, rolling down the spiral guide plates inside the tube and discharged from the other end. The filtrate flows away from the water trough. The machine is equipped with a flushing water pipe on the outer side of the filter tube, which sprays water at a pressure of 3 kg/cm² in a fan shape to flush and clear the filter mesh, ensuring the filter mesh remains in good condition for water permeation.

Filter Capacity。

Trommel Microfiltration Machine Specifications Sheet