Walk-in Constant Temperature and Humidity Test Chamber

   Constant Temperature and Humidity Test Chamber

One, Conform to Standards:

u  GJB 150.9A-2009 《Humidity and Heat Test》

u  GJB 150.3A-2009 《High-Temperature Testing》

u  GJB 150.4A-2009 《Low Temperature Test》

u  GB/T 10586-2006 《Humidity and Temperature Test Chamber Technical Conditions》

u  GJB 360B-2009 "Testing Methods for Electronic and Electrical Components (Reliability Testing)"

u  GB/T 2423.1-2008(IEC60068-2-1:2007) 《Test Ab: Low Temperature》

u  GB/T 2423.2-2008(IEC60068-2-2:2007) 《Test Bb: High Temperature》

u  GB/T 2423.4-2008(IEC60068-2-30:2005)《Test Database: Alternating Humidity and Heat》

u  GB/T 2423.3-2016(IEC60068-2-78:2012)《Test Cab: Constant Humidity and Temperature》

II. Technical Specifications:

1.Temperature Range: 0℃ to -20℃ to -40℃ to -50℃ to -60℃ to -70℃ to +150℃ (Optional)

2.Stability Control: ±0.5℃

3.Temperature Deviation: ≤±2℃

4.Humidity Range: 20% ~ 98% RH

5.Humidity Fluctuation: ±1.5% RH

6.Humidity Deviation: ≤±3.0%RH

7.Power: AC1 3W 220V ±10% 50HZ / AC3 5W 380V ±10% 50HZ.

Section 3: Model and Working Internal Dimensions:

ZT-CTH-80L-S40W x 50H x 40D cm

ZT-CTH-120L-SW 50 x H 60 x D 40 cm

ZT-CTH-150L-S50W x 60H x 50D cm

ZT-CTH-225L-S60W x 75H x 50D cm

ZT-CTH-306L-S60W x 85H x 60D cm

ZT-CTH-408L-S60W x 85H x 80D cm

ZT-CTH-800L-SW 100cm x H 100cm x D 80cm

ZT-CTH-1000L-S100W x 100H x 100D cm

Material and Structure: The overall structure is of a body type.

1.Inner Box Material: SUS 304# Stainless Steel Sheet

2.Outer Carton Material: SUS 304# Stainless Steel Sheet/High Rust-Resistant Cold Rolled Sheet with Paint Coating