GJB Fungus Test Chamber

One,GJB 150.10A-2009Mold Test ChamberMeets Standards:

1.GB10588-2006"Mold Test Chamber Technical Conditions"

2.GJB 150.10A-2009"Mold Test Method for Environmental Testing of Military Equipment"

3.GB T 2423.16-2008"Environmental Tests for Electrical and Electronic Products - Part 2: Test Methods and Guidance - Test J and Guidelines on Mold Growth"

4.GJB150.9-93（MIL-STD-810D）《Humidity and Heat Testing Method》；

5.GJB360B-2009 《Test Methods for Electronic and Electrical Components (Reliability Testing)》；

6.GB/T10586-2006 "Technical Conditions for Humidity and Heat Test Chamber"

Two,GJB 150.10A-2009Mold Test ChamberSpecification Model and Technical Parameters:

ZT-CTH-150M

ZT-CTH-225M

ZT-CTH-306M

ZT-CTH-408M

ZT-CTH-800M

ZT-CTH-1000M

1.Temperature Range: +10~+80℃

2.Temperature fluctuation: ±0.5℃

3.Temperature Deviation: ≤±1.5℃

4.Wind Speed Range: 0.5～10 m/s

5.Fresh Breeze System: Automatic Cleaning and Fresh Air Replacement

6.Sterilization Equipment: UV Sterilization

7.Humidity Range: 30% ~ 98% RH

8.Humidity Fluctuation: ±1% RH

9.Humidity Deviation: ≤±3.0%RH

10.Attachments: Humidity and Temperature Logger, Mini Printer (Optional)

8.Power: AC1 3W 220V±10% 50HZ / AC3 5W 380±10% 50HZ.

Section 3: Material and Structure:

1.Inner Box Material: Mirror-polished SUS 304# Stainless Steel Sheet
2. Outer Carton Material: SUS 304# stainless steel sheet/special rust-resistant cold rolled steel sheet with plastic coating and baked paint

4. ModelWorking dimensions: (Selection)

ZT-CTH-150M50W x 60H x 50D cm
ZT-CTH-225M 60W x 75H x 50D cm
ZT-CTH-306M - Width: 60cm x Height: 85cm x Depth: 60cm

ZT-CTH-408M60W x 85H x 80D cm

ZT-CTH-800M100W x 100H x 80D cm

ZT-CTH-1000M100W x 100H x 100D cm