Introduction to the specifications and dimensions of the dust removal skeleton with Wen's tube in Puyang:
Puyang with Venturi tube dust removal framework and bag filterThe skeleton materials include galvanized, stainless steel, etc,Also known as dust removal cage bone, it adoptsskeleton makingThe specialized equipment is welded and formed in one go, and the dust removal skeleton is the rib of the filter bag,Therefore, it is also known as a dust removal framework,The quality of the dust removal cage directly affects the working condition and service life of the filter bag.
Surface treatment of dust removal skeleton: including galvanizing, spraying, anti-corrosion treatment, surface organic silicon spraying, etc.among whichGalvanized dust removal skeleton is formed by welding the dust removal skeleton，Surface treated after galvanizationAnd become,The galvanized dust removal skeleton is formed by one-time welding using specialized equipment. The dust removal skeleton is divided into three lengths: diameter 125, 160, and 250, which can be customized according to customer requirements. Galvanized dust removal skeleton in dust removal worktoolHas good usage characteristics and advantages.
Puyang with Venturi tube dust removal frameworkTechnical Requirements:shouldThis toolHaving sufficient strength, stiffness, verticality, and dimensional accuracy topreventCompression deformationandDamage during transportationAnd also preventThe occurrence of mutual contact, difficulty in bagging, and friction between bag frames after the filter bags are installed in the dust collector。The surface of the filter bag dust removal skeleton can be treated with anti-corrosion treatment, which can be done by spraying or galvanizing. The anti-corrosion treatment agent used for high temperature should meet the needs of high temperature。skeletonAll solder jointsMust be weldedFirmly secured, no loose solder joints, virtual solder joints, or missed solder joints are allowedPhenomenon.
Dust removal frameworkyesUsing the phenomenon of corona discharge to adsorb powder coating onto the workpiece. The process of making the dust removal skeleton is as follows: the powder coating is fed into the spray gun by the powder supply system through compressed air gas, and a high-voltage electrostatic generator is added at the front end of the spray gun to generate a high voltage. Due to corona discharge, dense charges are generated near the spray frame. When the powder is sprayed from the nozzle of the spray frame, charged coating particles are formed, which are attracted to the spray frame workpiece with the opposite polarity by the electrostatic force. As the amount of powder sprayed increases, the charge accumulation also increases. When it reaches a certain thickness, due to the electrostatic repulsion effect, it does not continue to adsorb, so that the entire spray frame workpiece obtains a certain thickness of powder coating. Then, after high temperature, the powder melts, flattens, and solidifies, forming a hard coating on the surface of the spray frame workpiece. Coating film. For more dust removal accessories products, please follow our website http://www.btshhb.com
