RCO catalytic combustion organic waste gas treatment equipmentProduct Introduction

RCO catalytic combustion organic waste gas treatment equipment is a type of waste gas treatment equipmentDeodorization equipmentThe working principle of this system is achieved by using an organic waste gas adsorption and desorption integrated machine. The system consists of multiple processes including waste gas pretreatment, adsorption, desorption, fresh air heat exchange, catalytic combustion, and induced draft system. The exhaust gas treatment process (see attached figure) is as follows: under the action of the adsorption fan, the exhaust gas first enters the pre filter box to filter and intercept the particulate matter in the exhaust gas. The pre filter enters the adsorption and desorption boxes on both sides respectively (with a bypass insulation layer in the middle, and the bypass valve is directly opened for discharge when the organic waste gas detection concentration meets the standard). By adsorbing and purifying organic waste gas through an adsorption layer, a catalytic combustion device is installed above the adsorption layer. When the adsorption layer approaches saturation,The PLC controller automatically closes the intake valve and opens the catalytic combustion intake valve and catalytic combustion electric heater. Fresh air entering the system from the outside is heated to a certain temperature by an energy-saving device under the action of a desorption fan, and then enters the activated carbon adsorption layer for desorption. The desorbed gas enters the catalytic burner and undergoes oxidation reaction to CO2, H2O and other substances under the action of the catalyst; The gas after combustion is discharged from the exhaust port, and the products have no secondary pollution.

Principle and Process Flow Diagram of RCO Catalytic Combustion Organic Waste Gas Treatment Equipment (Attached)

RCO catalytic combustion organic waste gas treatment equipmentThe signal detector of the automatic control system is set at the outlet to automatically detect the concentration of exhaust gas at the outlet and transmit the concentration data toPLC controller, based on transmitted data, sends control instructions to control the automatic opening and closing of the intake valve and catalytic combustion intake valve on the intake port. Continuous purification of activated carbon adsorption layer is achieved through real-time desorption of activated carbon adsorption layer. To ensure the continuous operation of production, two sets of adsorption and desorption devices are alternately used.

Botou Shiheng Dust Removal Equipment Co., Ltd. is a manufacturer specializing in catalytic combustion equipment,We have been producing catalytic combustion equipment for over ten years and have rich experience in research and development technology. For more deodorization equipment, please follow our company website http://www.btshhb.com