Product Introduction：  

The FD200-2500 horizontal large milling end face drilling center hole machine/milling machine is mainly designed for the processing of medium and large shaft parts with a length of 2500mm or less up to ∅ 200. It adopts a dual spindle power head with opposing milling and drilling separation, which can meet the requirements of milling end faces, drilling center holes, and turning outer circles. The specially specified configuration can process threaded holes below M40. This series of machine tools has the advantages of wide processing range, complete functions, strong rigidity, and easy operation.

Product features:

1. Adopting gear rack hydraulic self centering vise, the guide surface is quenched to a hardness of HRC52 or above, the sliding surface is carefully scraped and assembled, and centralized lubrication and oil supply are used. The lubrication is sufficient and reliable, the performance is stable, the clamping is convenient, and the clamping force is strong.

2. The high rigidity rectangular guide rail has been quenched to a hardness of HRC52 or higher, with a cross-sectional width of 130mm. The guide rail surface has been treated with plastic coating to prevent low-speed crawling and improve its service life. It adopts precision grinding grade double screw ball screw transmission, with high precision and long service life.

3. Adopting a dual spindle design with milling and drilling separation, the structure is reasonable and easy to adjust the tool. The power head adopts gear transmission, with high torque and strong cutting force.

4. Four axis servo CNC system, accurate positioning, simple position handwheel operation, and easy adjustment.

5. Adopting a positive displacement electric lubrication pump to fully and effectively lubricate the guide rail and screw, improving the service life of the machine tool.

6. Standard track type chip conveyor, can choose rear or side row

7. Optional functions: outer circle, chamfering, drilling, tapping, etc.