Product Name: ZTE Type Damping Spring Shock Absorber
Product alias: ZTE type damping spring shock absorber
Product Introduction of Damping Spring Shock Absorber:
Damping Spring Shock Absorber (ZTE Type) Characteristics of Damping Spring Shock Absorber: The body material is divided into ordinary cast iron and ball milled cast iron. The spherical cast iron body is hot-dip galvanized and has good weather resistance. Special structural design, height can be adjusted according to actual needs.
Lightweight and sturdy in appearance, easy to install, suitable for various mechanical vibration reduction devices. The springs have undergone heat treatment, ED rust prevention, baking paint and other processing procedures. Load deflection of 20mm and 40mm can effectively eliminate mechanical structural vibration. Bottom anti slip rubber, easy to install and high in safety, easy to control and adjust the level, can effectively eliminate floor vibration, and the price is also relatively cheap.
The main use of the ZTE type damping spring shock absorber is suitable for various chillers, cooling towers, floor fans, or floor air conditioning units.
Installation instructions for damping spring shock absorber: Before installing the damping spring shock absorber, please confirm whether the model, specification, and model of the shock absorber are correct. The compression amount of the shock absorber is generally between 10-25mm. After placing the shock absorber in the correct position, the fixing bolts need to be removed first, and then the fixed foot of the equipment should be installed on the shock absorber and fixed. First, fix the shock absorber with basic bolts. Adjust the height of the shock absorber so that the equipment is level. Adjust the nut clockwise upwards and counterclockwise downwards, adjust it horizontally, and then connect the pipeline.
If the connecting pipeline next to the machine or water tower increases the load of the shock absorber due to the addition of suspended pipelines, an XDD type pipeline shock absorber must be installed separately to avoid insufficient load on the shock absorber.