The intelligent charging and discharging battery activator is specifically designed for deep charging, discharging, activation, detection, and capacity analysis of outdated individual batteries. Its principle is to activate the active substances of the battery plates that have failed through multiple cycles of charging/discharging, in order to improve the battery capacity and extend its service life. By adopting modern power electronics technology and intelligent microprocessing technology, combined with computer data processing software, the activation process of the battery is intelligently controlled, and outdated batteries are repaired and restored to achieve resource regeneration and utilization.

Main features and functions

● Display mode: Large LCD screen display, Chinese menu prompts, real-time display of all test data: voltage, current, capacity, time, and internal temperature, etc.

Control mode: microcontroller control, set the average charging voltage, floating charging voltage, discharge termination voltage, charging/discharging current, duration, and internal temperature through the keyboard.

● Working mode: (1) Constant current discharge mode automatically completes the capacity test or load capacity test of the battery. (2) Intelligent three-stage charging mode: During the initial stage of charging, constant current technology is used to maintain a constant charging current and quickly increase the battery voltage. When the charging voltage reaches the upper limit voltage, it automatically switches to constant voltage and current reduction charging, effectively improving the capacity conversion efficiency of the battery. At the end of charging, it switches to trickle floating charging, ensuring that each individual battery receives balanced power and maximizing the recovery of battery capacity. This effectively solves the problem of uneven voltage among individual batteries and avoids the danger of overvoltage charging. (3) Cycle discharge and charging function: Set the discharge/charging hourly rate and the high and low limits of its voltage, automatically cycle the discharge and charging process once; (4) Battery activation function: Set the number of battery activations to activate the battery pack.

●Automatic shutdown function: It automatically stops working when any of the following conditions are met: time, capacity, protection voltage, activation times, etc.

● Automatic alarm function: It has intelligent anti reverse connection function, which automatically alarms when there is high temperature or disconnection of battery pack wiring, under voltage, over-voltage, over-current, etc.

Real time monitoring function: Real time display and control of various set parameters (such as voltage, current, capacity, duration, and internal temperature)

●Record query function: The activator can store 8 sets of charge and discharge data, which users can query according to their needs.

●Data transfer function: It has standard USB interface and RS232 interface. After charging, data can be directly uploaded to the computer through USB flash drive or RS232 interface, solving the problem of large capacity data storage.

●Data processing function: After being analyzed and processed by the supporting data processing software, activated data can automatically generate various curve charts and support printing.

●Computer remote control function: Charging and discharging parameters can be set and modified through the computer; Control the activation device to start and stop charging and discharging.

● External voltage: External voltage can more accurately test the voltage of the battery during charging/discharging.

● Anti reverse connection function: When the test cable is connected to the positive and negative poles of the battery in reverse, the activation device will prompt that the battery is not connected or the battery voltage is low, protecting the activation device from damage.

Calibration and correction function for voltage and current display values: It can calibrate and correct voltage and current.

●The power consumption components are made of specially designed alloy resistors, produced with independent intellectual property patented technology, with high power density, no open flame, safe and reliable, and long service life.

●Adopting modular design, it has significant characteristics such as high degree of automation, easy operation, high charging recovery rate, and energy saving. Compact size, easy to carry, forced air cooling for heat dissipation.