DZSJ-2L 1100/1300/1500 Twin Layer Swing Arm Blowing Molding Machine
Key Technical Parameters:
Specification Model | DZSJ-2L 1100 | DZSJ-2L 1300 | DZSJ-2L 1500 |
Applicable Materials | LDPE- LLDPE -HDPE -MLDPE | LDPE –LLDPE- HDPE- MLDPE | LDPE –LLDPE- HDPE -MLDPE |
Product Width | 600-1000 | 800-1200 | 1000-1400 |
Product Thickness | 0.03-0.12 | 0.03-0.12 | 0.03-0.12 |
High extrusion capacity | 60-90kg/hr | 90-120kg/hr | 120-150kg/hr |
Extruder | |||
Bolt diameter | φ55/55 | φ65/65 | φ70/70 |
Screw pitch to diameter ratio | 28:1 | 28:1 | 28:1 |
Screw material | SACM-645/38 CRMOALA | SACM-645/38 CRMOALA | SACM-645/38 CRMOALA |
Material Tube | SACM-645/38 CRMOALA | SACM-645/38 CRMOALA | SACM-645/38 CRMOALA |
Material Cylinder Cooling | 180w×2 | 180w×2 | 250w×2 |
Main Engine Power | 15kw/15kw | 22kw/22kw | 30kw/30kw |
Material Cylinder Temperature Control | 3 | 3 | 3 |
Average power consumption | 40 | 60 | 80 |
Mold Head | |||
Mold mouth | φ250 | φ300 | φ400 |
Temperature Control | 3 | 3 | 4 |
Wind Ring | φ800 | φ1000 | φ1200 |
Fan | 3 | 5.5 | 7.5 |
Traction Unit | |||
Track roller width | φ140×1100 | φ160×1300 | φ160×1500 |
Effective membrane width | 1000mm | 1200mm | 1400mm |
Traction speed | 10-80 | 10-80 | 10-80 |
Traction motor power | 1.1 | 1.5 | 2.2 |
Coiling Device | |||
Reeling motor power | 10N.m-3 | 16N.m-3 | 16N.m-3 |
Coiling Speed | 10-80 | 10-80 | 10-80 |
Dimensions | 6.5×2.2×6.3m | 7×2.5×6.8m | 7.5×2.7×7.2m |
Note: The above configuration can be adjusted according to customer requirements.
Dimensions may change without prior notice.
Optional Equipment:
Automatic Material Feeding Machine
2) Surface Treatment
3) Air Compressor
4) Quick-change net device
