1.    Cleaning pressure: 10-20KG (customized according to requirements)

2.    Cleaning flow rate: 5-20m3/h

3.    Compressed air pressure ≥ 0.4MPa (source to be provided by oneself)

4.    Divided into a cleaning room and a rinsing room, using manual loading and unloading of materials,

5.    Design fixtures and jigs according to the structure of the parts in the cleaning and rinsing room,

6.    There is an alignment nozzle installed in the inner hole of the workpiece.

7.    The electrical system is controlled by PLC.

8.    All are non-standard customized models.

Note: Non standard customized products can be customized according to needs!