ZG-0.2LKH Laboratory Miniature Electric Hot-Cold Open-Shell Compounding Machine
Compounding Chamber Volume: 0.2L
2. Main Motor: AC motor, 2.2 kW power rating
3. Gearbox: Base and frame are made of low-carbon steel structure, equipped with a forced lubrication circulation system.
4. Rotor: Double-edge, synchronous rotor structure (can also be designed and manufactured according to customer-provided rotor structure drawings), front and rear rotor speed ratio of 1:1.20 or ST synchronous rotor; specific parameters can be customized according to customer requirements. Cast steel heat treatment and hardening, surface hard chrome plating; ball and roller bearings for bearings; bearing lubrication bath; rotor speed: 0.2L: 36 RPM; specific speed can be customized according to customer requirements.
5. Facing: Steel structure, drilled and heat treated, with hardened chrome plating on the inner surface; Bracket: Steel structure, with hardened chrome plating on the inner surface.
6. Top栓: Cylinder-driven, hard chrome-plated surface; End face seal: seal ring made of high-wear-resistant material, self-lubricating bearing, hinge spring pressure seal
7. Filling hopper: manual operation. Control method: operation available in manual and semi-automatic; High-temperature compounding machine temperature: tap water normal temperature +10° to high-temperature compounding machine temperature of 650° after processing
8. Base: The frame is made by welding steel sections and steel plates, then processed into shape.
9. The mixing chamber's middle slot is made of wear-resistant alloy steel, with the side walls constructed from medium carbon steel plates that have been welded and processed.
10. Stirring shaft - The shaft core and blades are made of alloy steel. The bearing housing is made of ZG20 steel, and the bearings are roller bearings.
11. Feeding Unit - This mechanical design features a front feeding device, with pressure adjustable via the user's air valve at will.
12. Leakproof Device - Mechanically sealed and tightened with a shaft seal on the side of the agitator shaft; leakproof structure is certified.
13. Pressure Cover Assembly: Made of alloy steel, applies pressure to the raw materials during blending operations, utilizing an air cylinder for vertical lifting and lowering actions.
14. Discharge Mechanism Structure: The compounding chamber opens automatically with air, allowing materials to fall into the center collection tray (easy to collect, and cleaning is more convenient).
15. Transmission Structure: Main motor 2.2KW AC, voltage 380V. Transmission Method: The main motor and the reducer are connected in an integrated transmission.
16. Air Compressor Pipe Fittings - Compressed Air Accessories (3-point assembly, solenoid valve) and Mechanical Body Pipe Fittings
17. Main Electrical Control Equipment: Temperature Setting: Both automatic and manual options available. With alert actions, various timing settings, and capable of forward and reverse operation.
18. The main electrical components are imported brands, with the entire machine bearings using Timken TWB brand.
19. The mixing shaft is made of alloy steel. Areas prone to wear are welded with imported German wear-resistant high-speed steel, for added strength and durability.
20. "Shan" type mixing tank, the main body of the mixing tank is made of wear-resistant alloy steel, with the shearing section being surfacing welded with German锋steel.
21. Side wall leak prevention device made with high-tech materials: Leak-proof structure certified
22. The pressure cover features an "M" type structure for more even rubber material mixing.
23. Volume: (W×D×H) 1300*520*1590MM
24. Weight: 350 kg
