ZG-3L Laboratory Mini Electric Water-Cooled Compounding Machine
Volumetric Capacity of the Compounding Room: 3L. Main Motor: AC motor, power 7.5 kilowatts.
2. Gearbox: Base and frame made of low-carbon steel structure, equipped with a forced lubrication recirculation system.
3. Rotor: Double-edged, synchronous rotor design (also available in custom designs according to customer-provided rotor structure diagrams), front to rear rotor speed ratio of 1:1.20 or ST synchronous rotor; specific parameters can be customized according to customer requirements. Forged steel with hardened treatment, surface镀铬; ball roller bearings for bearings; lubrication bath for bearings; rotor speed: 7L: 36 RPM; specific speed can be customized according to customer requirements.
4. Wall Treatment: Steel structure, drilling and heat treatment, inner surface hardened and chrome plated; Bracket: Steel structure, inner surface hardened and chrome plated.
5. Top bolt: Cylinder-driven, surface hard-chromium plated. Face seal: high-wear-resistant material sealing ring, self-lubricating bearing, hinge spring top-press seal
6. Feeding hopper: manual operation. Control method: manual or semi-automatic; Refining machine temperature: room temperature to 300°C; capable of high temperature up to 650°C.
7. Base: The frame is made by welding steel bars and steel plates, then processed. Mixing chamber: The middle groove is made of wear-resistant alloy steel.
8. The side walls are made of medium carbon steel plate, welded and processed. The stirrer shaft and blades are made of alloy steel.
9. The bearing housing is made of ZG20 steel, with roller bearings used for the bearing.
10. Feeding Device - This machine is designed with a front feeding device, and the pressure can be adjusted at will by the user's air valve.
11. Leak Prevention Device - The side end of the agitator shaft uses a mechanical shaft seal clamp, with a leak-proof structure certified.
12. Pressure Cap Assembly - Made of alloy steel, applies pressure to the raw materials during blending operations, utilizing a pneumatic cylinder for vertical up and down movement.
13. Discharge Unit: Structure – pneumatic tilting from the mixing chamber. Tilt Angle: 110° to 135°. Tilt Power: Cylinder-driven
14. Transmission Structure: Main Motor: 7.5KW AC Voltage 380V. Transmission Method: The main motor and reducer are connected for integrated transmission.
15. Air Compressor Pipeline: Compressed air accessories (three-point assembly, solenoid valve) and mechanical body pipeline
16. Main Electrical Control Equipment: Temperature Setting: Both automatic and manual options available. With alert functions, various time settings, and capabilities for forward and reverse operation.
Advantages of the machine
17. The main electrical components are imported brands, with the whole machine bearings using Timken TWB brand.
18. The agitator shaft is made of alloy steel. Wear-prone areas are welded with imported German wear-resistant high-speed steel, making it even more robust and durable.
19. Mixed tank "Shan" type, the main body of the mixed tank is made of wear-resistant alloy steel, and the shearing section is surfacing with German high-speed steel.
20. Side wall leak prevention device made with high-tech materials: Leak-proof structure certified
21. The pressure cover is designed with an "M" structure for more even rubber material mixing.
22. Volume: (W×D×H) 1150*500*1580MM
23. Weight: 365 kg
