Floor Introduction
Fully steel static dissipative flooring with phosphatized surface and electrostatic spraying, inner cavity filled425# Standard Pure Cement, top surface coated with high-wear, fire-retardant high-pressure laminate (HPL) or (PVC) boards (uncoated as bare boards), with conductive edge strips around the perimeter.静电-dispersing tiles can also be applied on the surface to create anti-static ceramic-metal composite modular flooring.
System Assembly
The system consists of flooring, beams, and supports. It offers a high-load-bearing antistatic work surface and space for laying various lines below. The flooring is equipped with wiring boxes, providing electrical, data outlets, and conduits for various electrical and office equipment. The beams and adjustable-height supports are securely connected to form a stable lower support system with screws, and the flooring is镶嵌 within the grid formed by the beams.
Product Function
Full steel antistatic flooring prevents damage to electronic components and has the function to prevent fires or explosions when handling flammable gases and liquids. If static electricity is not controlled, it can lead to a series of losses, especially in the semiconductor and electronic product industries, resulting in product damage, equipment failure, wasted labor hours, and product returns. Therefore, resolving the static electricity issue is urgent.
Product Features
1. Full steel structure, with high tensile strength, strong load-bearing capacity, and good shock resistance.
All raw materials are anti-static, ensuring stable and reliable performance of the flooring system.
3. Surface adhesive material is antistatic, wear-resistant, waterproof, fireproof, dustproof, and corrosion-resistant.
High dimensional accuracy, good interchangeability, flexible assembly, convenient, and long service life.
Product Features
The product can be divided into two types: with edge and edgeless, with the edgeless type further categorized.
Anti-static steel flooring can be categorized into non-standard and national standard types based on whether they meet the relevant national standards.
Full steel static dissipative flooring mainly consists of: with sides featuringPVC Conductive Black Edging Strip; Edges without PVC Conductive Black Edging Strip; No black PVC edging, featuring HPL face printing black edges all around after installation, visually similar to edged flooring; The floor edges use F-type edging strips embedded between the face and steel plate.
Application Sites
Large and medium-sized computer rooms, communication center rooms represented by switches, various electrical control rooms, postal and telecommunication hubs, and military, economic, national security, aviation, aerospace, and traffic command and dispatching centers, as well as information management centers controlled by computers.
Full steel static dissipative flooring can be used with its matching full steel static dissipative ventilation panels and ground sockets. The ventilation panel structure is similar to that of the static dissipative full steel access floor, but the interior cavity is empty and contains no foam filling. Both the top and bottom steel plates of the flooring and the top surface skin are perforated with ventilation panels. The ventilation activity flooring, when paired with the full steel activity flooring, is used in locations where ventilation under the floor is required, with a ventilation rate of17%-36%. Ground inserts come with both power outlets and network jacks.
