Application Range:
Full steel flooring is suitable for environments with high load-bearing and anti-static requirements, such as main server rooms with large servers and cabinets; large, medium, and small computer rooms; communication centers with switches; various electrical control rooms; postal and telecommunication hubs; and military, economic, national security, aviation, aerospace, and traffic command and dispatch centers, as well as information management centers controlled by computers.
Performance Features:
1. Made of all steel, featuring high mechanical strength, strong load-bearing capacity, and excellent impact resistance.
2. Surface electrostatic powder coating, with features of matte finish, wear-resistant, waterproof, fire-retardant, dustproof, and corrosion-resistant.
3. Adhesively bonded decorative high-pressure decorative boards, with excellent wear resistance and antistatic properties, resistance to contamination, easy to clean, and strong decorative effects.
4. High dimensional accuracy, good interchangeability, flexible assembly, easy maintenance, and long service life.
5. Floors can be cut to any size, with easy installation accessories.
6. Four sides fixed, easy installation.
7. The lower space can be used for air conditioning ventilation and can be coordinated with the ventilation panel to adjust the ventilation volume at the bottom level.
8. For overweight equipment, simply adding supports under the floor can resolve the load-bearing issue.
9. Easy to disassemble and reuse; simply replace the decorative film.
10. When installing ground outlets, bore holes according to the specifications of the ground outlets. Application range: Full steel floors are suitable for high load and anti-static requirements, such as main server rooms with large servers and cabinets; large, medium, and small computer rooms; communication centers represented by switches; various electrical control rooms; telecommunication hubs; and military, economic, national security, aviation, aerospace, and traffic command and dispatch centers, as well as information management centers that use computer control.
Construction Technology:
1. Ensure the site for the installation of elevated flooring is thoroughly cleaned, with a requirement for a flat and dry surface. The ground should be leveled with cement and sand mortar, and the difference in height should be measured to be less than 4 millimeters using a 2-meter level.
2. Stake out and locate on the cleaned ground, with the purpose of determining the position of each bracket.
3. Install the bracket at the designated location, mount the frame, and adjust the overall height of the bracket.
4. Assemble the bracket beam while adjusting the beam horizontally. It is recommended to use a laser level, then tighten the screws to securely fasten the beam.
5. Install raised flooring and trim the edges simultaneously.
6. Install the skirting boards after the floor is laid to protect and beautify the wall edges.
7. Clean the floor surface after construction is completed.
