CX-KZX97-I Intelligent Control Device for Switchgear

I. Product Overview

The CX-KZX97 series intelligent control device for switch cabinets features an L.CD liquid crystal display, online contact temperature measurement (wireless temperature measurement), voice anti-error prompts, dynamic simulation diagrams, switch status, circuit breaker position, grounding blade position, spring energy storage status, high-voltage live indication, high-voltage live lockout, electrical test and phase check function, two-way three-phase live indication interlock, automatic or manual heating and dehumidification control, temperature and humidity value display, heater open circuit alarm, over-temperature indication, remote/local, cabinet lighting, human body sensing, pre-divide and pre-close flash indication, and many other functions integrated into one.

Section II: Technical Specifications

Power Supply: AC/DC 85~265V, Power Consumption < 10N

Temperature and Humidity Control: Single or dual temperature and humidity control

Measurement Range: Full Scale -20℃ ~ 100℃, Depth 0 ~ 99.9%RH

Communication Interface: RS485, Modbus-RTU communication protocol. Baud rate adjustable at 9600.

Open Circuit Alarm: When any heating element is open-circuited, the alarm output terminal closes and the alarm indicator light illuminates.

Operating Environment: Temperature -20℃ to 60℃, Relative Humidity <90% R1 No Condensation

Insulation Performance: All live parts are insulated from ground with a 500V open circuit insulation tester, resistance not less than 100M.

Medium Strength: Power to Enclosure AC 2000V/lmin

Wireless Temperature Measurement: 433MHz frequency band, capable of up to 18 points

Section 3: Product Wiring

Four: Dimensions