The particle size of the crushed material is a critical indicator for evaluating the crushing effect of the crusher. Therefore, it is crucial to know how to adjust the particle size of the crusher in a reasonable manner during its operation.

The issue that customers are experiencing in the crusher is abnormal vibration. Let's now examine the primary reasons for this phenomenon. It is mainly due to uneven feeding of artificial materials or feed particle sizes larger than the crusher's feed particle size, and the presence of metals with relatively high hardness within the crushed material.

How to solve the vibration of the crusher? The feeder should ensure the uniformity of the material during feeding. If uniform feeding is accompanied by vibration, stop and inspect to remove metallic solids from the material. After cleaning, check if the fixing screws are loose. If they are, tighten them. Then, inspect whether the particle size of the crushed material meets the customer's crushing requirements. If not, it's usually due to significant wear on the roller inside the crusher and not being timely replaced, leading to a decrease in the roller crushing performance of the material.

The solution is to replace the drums while ensuring the uniformity of incoming material. Additionally, the crushing particle size of the crusher should be adjusted reasonably to address the issues of uneven particle size of the crushed material and high crushing ratio. This phenomenon may occur due to the large gap between the rollers of the crusher, and some small-sized materials cannot be fully crushed. The solution is to adjust the gap between the rollers for the outlet. The sizes have been adjusted. If the material particles are still large, a two-stage crushing process needs to be repeated.

In summary, during the operation of the crushing machine, making reasonable adjustments to the crushing particle size not only meets the equipment's crushing needs but also is one method to enhance the efficiency of equipment use.