Ventilation Anti-Static Flooring
Full Steel (30% Ventilation Rate) Ventilated Flooring
Product Specifications
600×600×35mm
Product Structure
The steel outlet grille panel is焊接from a steel frame and cover sheet coated with conductive powder. The standard system consists of a floor with 16% to 40% free airflow.
【Application Scenarios】
To meet customer needs, aluminum exhaust grille panels can be integrated with various systems and are applicable in the following locations: manufacturing plants; laboratories; clean rooms; measuring rooms; data centers; photocopier rooms; computer centers.
The base structure is suitable for various types of flooring, with steel supports that can be adjusted to any height to meet user requirements. All supports are galvanized and undergo advanced reinforcement treatment, enhancing their bending strength. The bottom plate of the support can be bonded to the subfloor or securely fastened to the ground with screws as needed. The anti-vibration pads at the top of the support can secure the flooring installation and provide noise reduction; these pads are conductive, and if the flooring needs to be frequently lifted, the anti-vibration pads can be secured with rivets. Beams can increase the lateral stability of the entire flooring structure. Beams can also be added later as needed, and screws can be used to further secure the positions of both supports and beams. U-shaped beams are generally used to enhance the lateral stability of the flooring structure. C-shaped beams, in addition to reinforcing lateral stability, also increase the load-bearing capacity of the flooring structure.
Applicable in various locations: manufacturing facilities; laboratories; cleanrooms; measuring rooms; data centers; copying centers; computer centers. Modern server rooms and offices require a comprehensive air conditioning and cooling system.
The air pressure and airflow beneath the activity floor are adjusted according to the completed floor height and room requirements, via the distribution of the outlets and the handles placed on the outlet panels.
