Horizontal Gas (Fuel Oil) Thermal Oil Heater
Product Parameters: - Fuel Options: Natural Gas, Light Oil - Heat Transfer Medium: Thermal Oil - Output Temperature: 320 Degrees - Output Efficiency: 92-98% - Output Power: 120-12,000 kW - Output Energy: 100,000-10,000,000 kcal/h
Gasoline (fuel oil) heat transfer oil boiler, fueled by gas, fuel oil, or ethanol, using heat transfer oil as the medium. It can serve as a high-temperature heat source under various environments below 350°C. This product boasts high temperature, low pressure, and high thermal energy utilization. An optional steam generator is also available, which can produce saturated steam below 1.3 MPa for customer use.
This boiler features intelligent control for particularly convenient and simple operation. The controller features a simulated screen display, centralized processing control, and includes automatic ignition and shutdown program control, automatic combustion control, automatic switching and control of the circulating pump, as well as automatic fault handling and alarm functions.
Structural Features
The boiler utilizes a wet-back three-pass internal combustion structure, equipped with a top header pipe at the boiler's top. This effectively prevents direct flame radiation to the rear wall, increases the radiant heating surface area, and enhances the boiler's thermal efficiency.
2. Operates with a slight positive pressure, effectively enhancing the combustion intensity within the furnace. This results in a smaller volume for boilers of the same capacity and improves their thermal efficiency.
3. Utilize EDA technology for detailed calculations of furnace structure dimensions and flue gas flow rates, optimizing the full use of flame and flue gas heat exchange to ensure reliable boiler operation and adequate cooling.
4. Utilizes condensation technology to effectively lower the temperature of exhaust smoke.
5. Utilizing rational structural design and superior fire-resistant and thermal insulation materials, significantly reduces the surface temperature of the furnace, keeping it below 50 degrees Celsius (exceeding national standards), thereby minimizing heat loss.
6. Featuring a new design that reduces harmful emissions during fuel combustion, particularly nitrogen oxide emissions, in compliance with the national low nitrogen oxide emission standards.
7. Utilizing imported burners from multiple internationally renowned brands, suitable for various application scenarios, ensuring quality and safety.
