Applicable locations:
Biological field
Product Features
DPOFLEX BP01 peristaltic pump is a new product in the Lange industrial pump series. This product is mainly aimed at the field of biology. Stainless steel shell, capable of transmitting 17L/min in larger sizes. Optional ordinary pump head or low pulsation pump head, with a protection level of IP66. Supports 4.3-inch industrial grade display control and external control.
Features:
Stainless steel material, meeting different application needs
IP66 high level protection, suitable for complex and harsh environments
Support multiple fieldbus communications, digital and analog input/output control
Level 3 user permission management, GMP laboratory requirements
Supports multiple sensing technologies: leak detection, lid opening and shutdown, flow sensors, enabling predictive maintenance
Technical Indicators:
Applicable pump heads: GPH01, GPH02, GPH03, LPH01
Shell material: 304 stainless steel
Speed range: 0.1rpm-265rpm, reversible in both forward and reverse directions
Speed adjustment resolution: 0.1rpm
Display language: Chinese or English can be set
Control methods: button control, external signal control, communication control
Real time clock function: available
Working modes: flow mode, quantitative mode, calibration mode
Flow mode: The pump runs continuously according to the set flow rate, and displays the flow rate and speed during operation
Flow setting range: 1.1ml/min-17.0L/min (depending on pump head and hose)
Quantitative mode: Continuous automatic quantitative distribution is performed according to the set dispensing volume, dispensing frequency, interval time, and displays single dispensing volume, cumulative dispensing volume, and dispensing frequency/total frequency during operation
Quantitative single distribution range: 1.0mL-274.9L (depending on pump head and hose)
Quantitative frequency: 1-9999 times, infinite loop
Quantitative interval time: 5-9999 seconds
Display mode: 4.3-inch industrial grade LCD screen
Input: Waterproof film button
Flow correction: Input the actual flow value and automatically perform flow correction. The correction time can be set
Communication interface: RS485, TCP/IP (optional)
Communication protocol: Supports Modbus RTU, Industrial Ethernet, Profibus DP (optional)
Analog input function: 0~10V analog input 1 channel, 4~20mA analog input 1 channel
Analog output function: 0~10V analog output 1 channel, 4~20mA analog output 1 channel
Digital input function: direction switching trigger, start/stop control trigger
Digital output function: frequency speed output, 3-channel configurable relay output
Open lid shutdown function: Yes
In case of accidental power failure, the device should be stopped immediately. After restoring power and restarting, personnel must be required to operate it and it should not automatically turn on
Lock screen anti misoperation: Yes
Leakage detection function: Yes (optional)
Flow detection and display function flowmeter (optional)
Level 3 permission management function: Yes
Electronic signature function: meets the audit tracking requirements of FDA 21CFR Part 11 regulations
Logging function: Yes
3Q Verification System: IQ/OQ
Certification: CE, UKCA (TUV SUD certification)
Safety regulations: EN 61010-1:2010, EN IEC 61010-2-201; EMC：EN IEC61000-6-2，EN IEC 61000-6-4
Dimensions (length * width * height), excluding pump head: 260 * 407 * 290mm
Applicable power supply: AC100-240V 50/60Hz
Working environment temperature: 5-40 ℃
Relative humidity of working environment: relatively high percentage RH
Protection level: IP66
Weight (excluding pump head): ≤ 16.6kg
Other parameters:
The test conditions are to use a Lange silicone tube to transport drinking water, with a suction range of 0 and no pressure at the outlet
