Taiwan Yu Ding F21-4S Crane Remote Controller

Dimensions: 15.6×6.1×5.1 cm, Weight: Approximately 320 grams (including battery)

Receiver Size: 18.5×8.5×8.5 cm, Weight: Approximately 550 grams (without cable)

Product Performance Specifications:

4 single-speed buttons, 1 total stop button

Control points reach 7

Battery voltage warning device with automatic circuit breakage in case of low voltage.

Safety key switch to prevent unauthorized use.

Internally functional settings can be configured via computer interface.

Up/Down, East/West, South/North can be set to whether they mutually inhibit each other.

The auxiliary 1 key can be set to functions such as startup, acceleration, tap jump, and normal.

Control Distance: Up to 100 meters

Security Code: Over 4.3 billion unique combinations at factory, no duplicates

Operating Temperature: -35℃ to +80℃ (Battery temperature tolerance not considered)

Protection Level: IP65

Power Supply: DC 3V (2 alkaline AA batteries can last for 4 months)

Receiver Power Supply: AC 36V/220V/380V available, or DC 12V

Output Contact Rating: 5A fully sealed relay output (utilizing an AC 250V/10A relay, with a 5A fuse).

Standard Configuration:

1 piece (with strap)

Receiver 1 unit

The receiver comes with a 1-meter connection cable.

1 Operation and Maintenance Manual 1 copy

Suitable for wireless remote control of single-hoist, single-speed, two-motor electric hoists, and industrial equipment with 7 or fewer points.