We specialize in: Removal, repair, reinforcement, corrosion prevention, beautification, installation, painting of navigation marks, color rings, paint, and coatings for a full range of high-altitude construction projects, including all types of chimney water towers. Our work is safe, quick, technically excellent, priced competitively, and we uphold honesty and contractual obligations. We sincerely look forward to partnering for mutual success!

Chimney painting and coating, as well as beautification work for navigation buoys, generally involve two methods of operation, both requiring high-altitude climbing. The worker ascends to the top of the chimney or a platform, then proceeds with the chimney anti-corrosion project using either (1) a high-altitude suspended rope or (2) a high-altitude basket.

Safety Points for High-altitude Anticorrosive Construction

1. Familiarize yourself with the professional technical skills of this trade and all safety regulations for chimney anti-corrosion construction.

2. Must be 18 years or older and pass a physical examination to perform high-altitude work. Individuals with high blood pressure, heart conditions, epilepsy, and other conditions unsuitable for high-altitude work are prohibited from engaging in climbing operations.

3. Any work surface more than 2 meters above ground level with an incline greater than 45 degrees, or where the working surface is unstable or vibrates, should be considered as high-altitude work.

4. Protective gear must be worn properly, pants legs should be tucked in, a hard hat must be worn, and smooth-bottomed shoes are not allowed. A safety belt with adequate strength is required, and the rope should be tied to a solid building structure or metal framework; it must not be tied to any moving object.

Before ascending, the construction supervisor should conduct on-site safety training for all personnel.

6. Inspect all climbing equipment and safety gear (such as helmets, safety belts, ladders, planks, scaffolding, guardrails, safety nets, etc.) to ensure they are safe and reliable. Absolutely no risky operations are permitted.

7. Mark off restricted areas on the ground for high-altitude work zones and hang warning signs such as "No Trespassing" and "No Entry."

8. Prior to working near low-voltage power lines, contact for power outage must be made. Work can only be conducted after the power outage is confirmed, and insulating barriers should be set up. Workers must stay at least 2 meters away from the power lines (low voltage) and it is prohibited to work under high-voltage lines.

9. Tools, parts, and materials used for high-altitude chimney anti-corrosion work must be stored in tool bags. When ascending or descending, no items should be held in hand, and movement must be along designated routes; materials or tools should not be thrown from height. It is forbidden to stack tools or materials that can roll or slide on scaffolding, and they must not be carelessly placed. After work is completed, all items that can fall, such as tools, materials, and parts, should be cleaned up promptly to prevent injury from falling objects. When handling large components, reliable lifting equipment should be used.

10. Always be aware of hazard signs and areas. Adequate lighting must be provided during night work; otherwise, construction is prohibited.

11. Strictly prohibited from performing vertical work simultaneously at both levels. In case of special circumstances where vertical work is necessary, prior approval from relevant leaders is required, and a protective shed or other isolation facilities should be set up between the two levels.

12. Absolutely no resting in elevated areas without guardrails to prevent falls.

13. Boards longer than 3m cannot accommodate two workers simultaneously.

14. Walkways, ramps, gangways, and transportation tracks should be kept clean at all times.

15. No elevated work is permitted outdoors when winds reach grade 6 or above.