pipelineexhaustsilencer
1pipelineexhaustsilencerPurpose:
This seriesPipeline exhaust mufflerMainly used for electricity,petroleumMetallurgy, Mining, TextileCementChemical industry, steel industryFactory, thermal power, air separation, air compressorwaitin the industryPipeline gasemissionEffective noise reduction.
IIpipelineexhaustsilencerFeatures:
1、Pipeline exhaust muffler
To suppress the emission noise of high-pressure steam flow, this typePipeline exhaust mufflerThe system is designed based on the principle of noise reduction. Gas insilencerAfter a flow control process, it enters the pressure reducing body and undergoes a large volume expansion to form a low-pressure airflow before being ejected. During this process, some of the internal energy in the steam flow is converted into sound energy of a certain frequency. Although the noise power is greatly reduced, it often remains higher than the standard value due to exhaust deviation from the design value and other reasons. For this purpose, a double-layer structure soundproof cover was designed outside the pressure reducing body, which was designed based on the spectral characteristics of the residual noise emitted by the pressure reducing body to effectively absorb the residual noise. After the user installs as required, the total noise reduction can reach35~45Decibel.
2、Pipeline exhaust muffler
Forgas emissionsWaiting for the devicevalveThe exhaust should not only avoid excessive noise, but also allow the steam flow to be smoothly discharged. Therefore, the commonly used multi-stage throttling and small hole injection noise reduction methods in the past are not suitable. This limitation has always beenIt's a valve silencerThe design difficulty is alsovalvedoorsilencerThe reason for poor noise reduction effect. thisvalvedoorsilencerThe principle of noise reduction using resistance, spray, and resistance is also adopted, in which a large hole expansion is used instead of a smaller diameter control hole, which further enhances the noise reduction effect of resistance, spray, and resistance in the structure, achieving the ideal noise reduction effect.
IIIpipelineexhaustsilencerOrdering Notice:
1Object of use (such as boiler ignition exhaust)valveExhaust and fanimport and export、Nitrogen, oxygen, airExhaust gas, etc 。
2、exhaustquantity（t/h）（m³/h）
3、pressure（MPa）（bar）（Kpa）（Pa）
4Temperature(℃)
5Original interface diameter and wall thickness(For example: Φ)159*6）。
6As long as the technical parameters provided by the user are complete, our company can design and produce on behalf of themotherSpecificationspipeline exhaustSilencer.
4pipelineexhaustsilencerInstallation precautions:
Instructions: 1When the specifications of the user's exhaust pipe do not match the table, the external dimensions will change;
2、pipeline exhaustThere are many types of objects to be placed, and our factory will adjust the exhaust volume and pressure based on the user's withdrawalTemperatureDesign of takeover dimensions
