Introduction to Aotai Automation Head Loss Instrument

    Water Head Loss ControllerAbbreviated as HL Meter, the Head Loss Controller is specifically designed for the detection of raw water and wastewater filtration reservoirs, capable of measuring liquid level differences and head loss between two points, and can be remotely transmitted. The Head Loss Controller is composed of a head transmitter and a display instrument connected together.

The Head Loss Controller is composed of a water head transmitter and a display instrument section connected together.

The feature lies in the fact that the water head transmitter is composed of the transmitter body, a pool surface level sensor, and a filtered water head sensor connected together. The pool surface level sensor is connected to the transmitter body's circuit board inside the housing via a cable. The filtered water head sensor can be fixedly connected to the transmitter body as a whole or connected separately through a cable.

Its structure is compact, well-designed, easy to install, and accurate in detection. It can be installed at a location of your choice without the need to drill holes in the filter pool wall, suitable for monitoring water head loss in various filter pools.

AO960 Water Head Loss Transmitter: Accuracy 0.5%, Level Range: 0-5m

AOB/AOBY Water Loss Controller: Relay: 1-4 units, output 4-20mA, MODBUS communication, power 220VAC or 24VDC, optional functions, LCD or LED display optional.