Product Introduction：
PVC-UWater supply pipes made primarily from sanitary-grade polyvinyl chloride resin, with added quantities of stabilizers, lubricants, fillers, colorants, etc., extruded into shape, then produced through cooling, shaping, inspection, and packaging processes. Widely used in indoor water supply, potable water supply, and other water conveyance projects.
Product Features:
Excellent sealing performance：PVC-UGood sealing performance at the pipe connection for water supply pipes，Aesthetically pleasing，Durable and robust；
Non-toxic and hygienic：PVC-UPipe material: Sanitary，Pollution-free to water quality；
ResistancePlease provide the Chinese content to be translated.：PVC-USmooth inner wall for water supply pipes，High flow rate；
Corrosion-resistant：PVC-UPiping for water supply features excellent wear, alkali, and corrosion resistance.，Service life up to50Year；Low maintenance costs；
Lightweight：PVC-ULightweight for easy transportation, suitable for piping supply，Easy to install，Easy to repair，
High mechanical strength：PVC-UPipes for water supply have excellent pressure resistance properties.（0.1MPA-4.0MPA），Withstand-30℃-+60℃temperature，No observable body hardening or softening due to changes in climate or usage temperature.
Installation Method：
1、The tube ends should be flat and perpendicular to the axis.，Straight pipe end along30-45Degree of chamfered external angle，Bearing end wall thickness allowance1/4-1/3；
2、Pipe fitting inner wall of the tube and the insertion range of the outer wall at the tube end，Wipe clean with alcohol or a dry cloth.，Mark insertion depth，Apply a sufficient amount of adhesive，Apply swiftly, evenly, and in the right amount.，No skipping coating；
3Insert the pipe into the socket.，Force the pipe material into the pre-marked depth area.，Small diameter pipe material rotation90Degree，Large diameter pipes can be hammered into place，Clean the extruded adhesive thoroughly.；
4、Pipeline installation complete.，N/A48Water and pressure testing can be conducted after several hours.，The pipeline distance for pressure testing should be400m-500m。
Product Specifications:
Nominal | “ Lins Co.Brand PVC-U Water Supply Pipe (GB/T10002.1-2006) | ||||||
Pipe materialsSeries S, Series SDR, and nominal pressure | |||||||
PN0.63 | PN0.8 | PN1.0 | PN1.25 | PN1.6 | PN2.0 | PN2.5 | |
Wall thicknessmm | Wall thicknessmm | Pile thickmm | Wall thicknessmm | Wall thicknessmm | Wall thicknessmm | Pavilion thickmm | |
20 | 2.0 | 2.3 | |||||
25 | 2.0 | 2.3 | 2.8 | ||||
32 | 2.0 | 2.4 | 2.9 | 3.6 | |||
40 | 2.0 | 2.4 | 3.0 | 3.7 | 4.5 | ||
50 | 2.0 | 2.4 | 3.0 | 3.7 | 4.6 | 5.6 | |
63 | 2.0 | 2.5 | 3.0 | 3.8 | 4.7 | 5.8 | 7.1 |
75 | 2.3 | 2.9 | 3.6 | 4.5 | 5.6 | 6.9 | 8.4 |
90 | 2.8 | 3.5 | 4.3 | 5.4 | 6.7 | 8.2 | 10.1 |
110 | 2.7 | 3.4 | 4.2 | 5.3 | 6.6 | 8.1 | 10.0 |
125 | 3.1 | 3.9 | 4.9 | 6.0 | 7.4 | 9.2 | 11.4 |
140 | 3.5 | 4.3 | 5.4 | 6.7 | 8.3 | 10.3 | 12.7 |
160 | 4.0 | 4.9 | 6.2 | 7.7 | 9.5 | 11.8 | 14.6 |
180 | 4.4 | 5.5 | 6.9 | 8.6 | 10.7 | 13.3 | 16.4 |
200 | 4.9 | 6.2 | 7.7 | 9.6 | 11.9 | 14.7 | 18.2 |
225 | 5.5 | 6.9 | 8.6 | 10.8 | 13.4 | 16.6 | |
250 | 6.2 | 7.7 | 9.6 | 11.9 | 14.8 | 18.4 | |
280 | 6.9 | 8.6 | 10.7 | 13.4 | 16.6 | 20.6 | |
315 | 7.7 | 9.7 | 12.1 | 15.0 | 18.7 | 23.2 | |
355 | 8.7 | 10.9 | 13.6 | 16.9 | 21.1 | 26.1 | |
400 | 9.8 | 12.3 | 15.3 | 19.1 | 23.7 | 29.4 | |
450 | 11.0 | 13.8 | 17.2 | 21.5 | 26.7 | 33.1 | |
500 | 12.3 | 15.3 | 19.1 | 23.9 | 29.7 | 36.8 | |
560 | 13.7 | 17.2 | 21.4 | 26.7 | |||
630 | 15.4 | 19.3 | 24.1 | 30.0 | |||
Note: Nominal wall thickness based on design stress10 MPa confirmed, wall thickness not less than 2.0 mm. | |||||||
Parts List:
