Integrated solar aeratorThe product is mainly used for aeration in waterways, offering better diffusion capability than impeller-type aeration machines. It utilizes a gas main and a pilot gas channel with a rubber membrane that allows for microporous aeration. It features a simple structure, high oxygen utilization rate, reliable performance, non-blocked air holes, no backflow of wastewater, uniform circumferential stress, long lifespan, easy installation and maintenance, and cost-effective system pricing. This product is a domestic innovation, reaching the international level of similar products and is currently one of the more economical and reasonable aeration machines on the market.

Integrated solar aeration machineSystem Maintenance: (Routine inspection of the floating solar aeration machine to check for leaks in the buoy)

1、 Solar panel cleaning, photovoltaic conversion efficiency testing, maintenance;

2、 Steel Bracket Maintenance;

3、 Solar Inverter Maintenance;

4、 Equipment wiring and grounding inspection;

5、 Solar panel cleaning, solar panel maintenance procedure;

6、 Every1Monthly cleaning of solar panels, with the maintenance mainly focusing on ensuring the solar power supply system and battery packs are all operating normally.;

7、 This includes inspecting each solar panel, the solar system wiring, and wiring connections, ensuring that each photovoltaic module is operating normally.;

8、 Inspect the color, wiring, pattern, embossed glass, and whether the frame is loose or damaged on the solar panels. Relevant conditions should be recorded in the maintenance records./Maintenance Log. Replace immediately or schedule replacement if damaged.;

9、 Each time, the surface of the photovoltaic panels can be cleaned, which can increase the power generation of the system. Depending on the actual on-site conditions, the frequency of cleaning can be appropriately increased.;

10Maintenance of the aeration main engine, regular inspection of the intake pipe for blockages;

Integrated solar aeratorSteel Support Bracket Maintenance:

The maintenance of steel brackets primarily involves checking for deformation; if any are found, they should be repaired promptly.;Check if there are any loose screws in the solar panel installation section; if so, tighten them immediately.

Integrated solar aeration machineInverter maintenance:

1Ensure all parameter values are set correctly.;

2Ensure the equipment is in perfect readiness and operational condition.

3Keep equipment clean and dry, maintain indoor ventilation;Keep away from water sources.;Do not place small metal items or similar on top of the instrument.;

4Do not allow unqualified personnel to open the device, operate, or modify parameters.;

5Do not move the product during its operation.;

6When a system error occurs, the solar inverter will sound an alarm. Please check the cause of the system error, investigate it promptly, and keep a record.;

7Regularly inspect system parameters and maintain a record of checks; if any anomalies are detected, identify the cause and take appropriate action.;If the cause cannot be identified, contact relevant professionals to investigate to prevent accidents and affect system usage.

8During system maintenance, be sure to disconnect the solar battery first, then cut off the load.