Water Reducing Agent Storage Tank/Foam-Proof Mixing Tank refers to a plastic PE material storage tank used for mixing, blending, adjusting, and homogenizing materials. The Water Reducing Agent Mixing Tank can achieve feed control, discharge control, and mixing control during the mixing process.

NuoShun Concrete Additive Storage Tank refers to the plastic PE container used for storing concrete additives.

Additive tanks include polycarboxylate mother liquid tanks, compounded homogenization blending tanks, water-reducing agent storage tanks, mother liquid tanks, and compounded finished product storage tanks.

Application of admixture blending technology:

1. The use of single-type admixtures in concrete is becoming increasingly rare, gradually evolving towards multifunctional directions.

2. The purpose of admixture blending is to simultaneously meet the various performance requirements of concrete and to produce a "synergistic effect" through the combined action of the various blended components.

3. Composite admixtures are typically made up of various surfactants or inorganic electrolytes. Examples include composite early-strength agents, composite antifreeze agents, pumpable agents, and composite retarding air-entraining water-reducing agents.

4. General blended additives are made from at least two component parts, forming binary or multi-component blends.

5. Each additive in the composite admixture plays a role at different stages of cement hydration, or acts together simultaneously.

Wuhan Nuoshun's 15-ton rotational molding storage tanks, PE water tanks, are currently available in flat bottom, conical bottom, and horizontal styles.

15-ton flat-bottomed PE water tank, tall model dimensions - diameter 2570mm, total height 3200mm

15-ton conical bottom PE water tank, specifications: diameter 2570mm, total height 3600mm

15-ton flat bottom PE water tank, chubby style, dimensions: diameter 2700mm, total height 3000mm, capable of one-time molding flange, supports DN50/DN65/DN80/DN100

15-ton cone-bottom PE water tank, deep cone style, specifications: diameter 2750mm, total height 4290mm, available for one-time molding DN400 flange.

Horizontal 15-ton PE water tank, transport drum, specifications and dimensions: Length 4450mm, Width 2380mm, Height 2050mm, Lid Opening 650mm

Introduction to PE Tanks

1. Rotomolding provides a single molding with excellent integrity, a balance of rigidity and flexibility, and can effectively withstand various impacts.

2. Long lifespan, hygienic and non-toxic, green and environmentally friendly, with a normal usage period of over 15 years.

3. Strong resistance to cracking; food-grade PE material is resistant to oxidation and aging, with excellent rapid crack propagation and slow crack growth resistance.

4. Strong corrosion resistance, capable of withstanding corrosion from most acidic, alkaline, and saline chemical media; no electrochemical corrosion, and no swelling.

5. One-time rotational molding ensures smooth interior and exterior surfaces with no dead corners, non-scaling, easy cleaning, and reduced microbial adhesion. The overall design is sleek, allowing for a smooth inner wall that is easy to clean and free of dirt accumulation.

7. Comprehensive range of pipe fittings available for direct insertion and connection of pipes in various materials and series, making installation and maintenance easy. Heat-fusion method is used for connecting with supply and return water lines, ensuring that the connection strength is higher than the pipe material itself.

Nuoshun PE Plastic Water Tank Product Specifications and Dimensions Description:

1. Made from food-grade LLDPE, molded by rotation in one single process.

2. Reasonably structured with no welds, offering high overall strength.

3. Impact-resistant, corrosion-resistant, and good temperature tolerance.

4. Volume ≤ 5M3, tank reinforcing ribs are annular inward ribs; Volume > 5M3, tank reinforcing ribs are annular outward ribs.

Each tank can be equipped with two inlets and outlets, which can be threaded or flanged, and pipe openings can be added according to customer requirements.

6. Product volume and specification size tolerance ±3%. inquiries for can thickness welcome.

Advantages: Made from food-grade PE plastic material and refined with modern ROTATLON (rotational molding) technology, it boasts excellent sanitation and UV resistance, as well as resistance to impacts and strong vibrations, longevity, algae resistance, ease of cleaning, rodent and termite proof, and convenient installation and movement.

Nuoshun Plastic Molding Products: Seamless plastic storage tanks, water tanks for drinking water from 0.2 to 50 cubic meters; PE water tanks, water tower storage tanks should meet the following conditions: sufficient wall thickness, even wall thickness, skilled manufacturing techniques, and strict factory requirements.

After-Sales Instructions:

1. The products are made of food-grade LDPE material, with the entire molding process done by rotational molding, which is acid and alkali resistant, food-grade, and meets food hygiene inspection standards.

2. The products come in a variety of colors including white, orange yellow, blue, and black, offering a range of options to choose from.

3. Product issues (excluding human factors), at least 15 years of use.

4. Upon product shipment, we can provide certificates of compliance and test reports, etc.

5. In case of any issues within one year (excluding human factors), we offer free on-site repair services.