MW-109-3BSilicone bag plastic adhesiveA one-component, single-coat solution,Simpler process,Various solid silicone or liquid silicone with plasticsABS、PC、TPUAdhesive bonding of materials such as nylon, glass fiber, and glass. Includes adhesive materials requiring or not requiring two-stage vulcanization, offering high cost-performance, direct substitution for imported adhesives at a low price, and strong bonding power. Suitable for silicone packaging applications.PCPhone cases, silicone kitchenware, baby products, etc.

Silicone case plastic gluePerformance:

Composition: Composed of unique copolymers and additives.

Appearance: Light yellow liquid.

Specific Gravity (25°C))：0.8 -0.9。

Packaging: 1-3-15kg

Shelf Life: 6 months

Silicone bag adhesiveUsage Instructions:

1. Gluing:By brush coating, dipping, or spraying methodsMW-109-3BApply evenly to the surface of the material to be bonded. Dry filmThickness recommended to be less than2UM。

2Dry:PCWithABSSuggestion110℃ Roasting10~20Minutes, metal materials150° C roasting10Minutes. After baking is complete, it is required that...48Complete follow-up processing within hours. It is recommended to finish on the same day. Avoid contamination and excessive defects due to contact with high-humidity air. If it exceeds48Reheat in the oven for an hour before proceeding to the next step.

3. Compression molding temperature, upper and lower mold temperatures110℃~ 200Between ℃, as per product specifications.

Silicone case plastic adhesiveCautionary Notes:

Workplace fire protection and ventilation to prevent long-term inhalation or skin contact. Use protective gloves and goggles. In case of adhesive getting on the skin, wash thoroughly with soap. If it gets into the eyes, rinse with plenty of water and seek medical attention promptly.

Silicone case plastic adhesiveStorage Method

Storage areas must be free from open flames, kept away from heat sources, and protected from static electricity, direct sunlight (excessive exposure), and violent impacts; maintain a safe distance from fire sources, acidic, alkaline substances, and flammable materials. Good ventilation is required, and the room temperature should be below 30℃ for storage; avoid room temperatures that are directly above...30℃Above will greatly shorten the storage time. The product is volatile; please seal the container after opening if there's any unused remaining. Keep out of reach of children!

This product manual is based on our company's test results and is provided for reference only. Please test the performance of this product first and then make appropriate adjustments according to your own construction equipment.