Silicone has a demolding characteristic and is difficult to bond with pressure-sensitive materials such as double-sided tape. Our company producesFast-drying silicone treatment agentMW-221Effectively addressed this issue,Ensures secure bonding between various double-sided adhesives and silicone products..This quick-dry treatment agent offers strong bonding, non-sticky silicone surface after treatment, rapid surface drying, foldable products after coating, non-transferable adhesive, and excellent bonding strength even in cold conditions in the north.
Fast-dry silicone treatment agentPerformance
Appearance: Transparent viscous liquid
Ingredients: Silicon Polymer, Curing Agent, Solvent
Environmental Protection: (ROHS,)REACHBisphenolAHalogen, ortho-phenyl
Fast-drying silicone treatment agentApplication Scope
Fast-drying silicone treatment agent MW-221 is widely used in self-adhesive silicone foot pads, silicone foam, thermal conductive silicone, automotive interiors, aerospace interiors, home appliance electronics, seals, and gaskets.LEDLight strips, children's building blocks, silicone accessories, etc., with various adhesive options3MDouble-sided tape, removable adhesive.
Rapid-drying silicone treatment agentUsage Instructions
Clean oil, water, impurities, etc. from the surface of silicone products.
2.Please provide the Chinese content to be translated.MW-221Coated on surfaces of silicone products requiring adhesion,(If necessary, apply twice),Place in a room-temperature environment for several minutes to dry (usually)1-3Minute(s).
3. Apply pressure-sensitive adhesive tape, such as double-sided tape, to the treated surfaceMW-221Silicone products,Gently apply pressure to bond the contacting surfaces.
4Applicable3-5Hours later, intensity reached70-80%.24After several hours, the intensity reaches high..If the temperature is too low or the silicone concentration is30If the temperature is 8 degrees or below, the curing time needs to be extended.
Fast-drying silicone treatment agentStorage Method
Storage areas must be strictly free from open flames, kept away from heat sources, and protected from static electricity, direct sunlight (exposure), and violent impacts; also, keep away from fire sources, acidic, alkaline substances, and flammable materials. Good ventilation should be ensured, and the room temperature should be stored below 30℃; avoid room temperatures that are directly higher than30℃Above will significantly reduce storage time. Product is volatile, please seal and store any unused portion after opening. Keep out of reach of children!
Fast-drying silicone treatment agentShelf Life: Unopened Container(≤30℃)Shelf life of storage6Month
Fast-drying silicone treatment agentPackaging: 3-15-20 kg/bottle18Or27KG/Piece(s).
