Jiaozuo Rongxuan Welding Molds, Aluminum Thermite Welding Molds, Exothermic Welding, Aluminum Thermite Welding Agent, Aluminum Thermite Welding Powder, Aluminum Thermite Welding Gun, Exothermic Welding Flux, Welding Powder, Exothermic Weld
1. Product Introduction
Our developed aluminum thermosetting焊剂 is easy to prepare, has a fast welding speed, and is simple to operate. Its hardness, static bend, and tensile strength test indicators all meet the requirements of similar imported finished products.Medium calorific value, strong fusion, high plasticity of the deposited metal, crack and peel resistance
2. Instructions for Use
（1) Thread the cable wire into the welding mold and lay it parallel on the pipe.
（2) Copper sheets are placed at the top of the welding mold's inner hole (covering the inner hole).
（3) Then, in sequence, place the aluminum thermite welder and the igniter on top of the copper sheet.
（4) Light directly with a match (open flame) or a lighter.
（5) After lighting, quickly cover the welding mold top with a lid, and wait until the combustion is complete.
（6) Prior to welding, the pipeline surface must be degreased and rust removed.
