Japan Magnescale Displacement Sensor DT32NV
Supports applications from assembly confirmation to dimensional measurement, a universal model for various uses.
While reducing costs, supports multiple applications
Good environmental resistance: Equivalent to IP64 (Type P)
Measurement Range: 12mm, 32mm
Resolution: 1µm, 5µm
Accuracy: 6µm p-p, 10µm p-p (varies due to measurement length and resolution)
Supports φ8mm central control pipe installation and side installation via M4 screws
Oil-resistant and excellent dustproof performance
Available with pneumatic actuation for the main shaft, an air-cylinder type extrusion (available only for the 32mm model. The 12mm model requires an optional product).
| Key Specifications | |||||
|---|---|---|---|---|---|
*1 Quality is the value excluding the cable part Changes to the content will be made without prior notice. | |||||
| Model | DT32N | DT32NV | DT32P | DT32PV | |
| Spindle Drive Method | Spring Compression Type | Pneumatic extrusion mold | Spring Compression Type | Pneumatic extrusion | |
| Measurement Range | 32mm | ||||
| Resolution | 5μm | ||||
| Measurement Force (at 20℃) | Upward | 1.1±0.8N | 2.9N or less | 9N or lower | |
| Horizontal | 1.3±0.8N | 2.9N or less | 9N or lower | ||
| Downward | 1.5±0.8N | 2.9N or less | 9N or lower | ||
| Accuracy (at 20℃) | 10µm p-p | ||||
| Operating Temperature Range | 0 ～ 50℃ | ||||
| Temperature Range for Storage | -10 ～ 60℃ | ||||
| Output Cable Length | 2m | ||||
| Control Valve Bore | φ8 0‒0.015mm | ||||
| Measurement Head | Steel ball φ3mm (M2.5p x 0.45 tensioned screw) | ||||
| Quality *1 | Approx. 120g | Approximately 140g | Approximately 120g | Approximately 140g | |
| Ingress Protection (IP) rating | ― | ― | Equivalent to IP64 | Equivalent to IP64 | |
