Packaging for right-angle iron typically comes in two forms: iron plate packaging and wooden packaging..Packaging must be carried out with protective measures in accordance with the relevant standards..

This packaging should be suitable for direct-angled iron inland transport.,And features good shockproof, rustproof, and anti-rough handling protection for the right-angle iron.,At right angle iron   Arrived on site.Transportation is a crucial aspect ensuring the non-deformation of right-angle iron.,So, when transporting at right angles to the iron, do not overload.,No speeding,No fatigued driving,Transportation not feasible under adverse weather conditions. 

The design drawings for the appearance and dimensions of the right-angle bracket may have some discrepancies from the actual product.,For example, the length, width, height, and diagonal measurements of right-angled angle iron.,Generally speaking,±0.02(aOrb)Between,Height requirement for right-angle iron bracket:630×630The right-angled iron220To140Between1000×1000Please provide the Chinese content that needs to be translated.800× 800The cast iron right-angle bracket height is300Please provide the Chinese content to be translated.400Between1600×1000The height of the above right-angled bracket iron is400Above. 

The right-angle iron requires installation and adjustment during use..Then,Clean the working surface of the right-angle iron.,Proceed upon confirmation of no issues.,During use,Be mindful to avoid excessive impact between the work surface of the part and the right-angle iron.,Prevent damage to the working surface of the corner iron; weight of the workpiece   Do not exceed the rated load of the right-angle iron bracket.,Otherwise, it could lead to a decline in work quality.,There's also a possibility of damaging the structure of the right-angle iron.,Even cause the right-angle iron to deform,Cause damage,Unable to utilize.