Different from traditional three-dimensional force platforms Six-axis force measurement technology Is for measurementXYZSimultaneously obtaining three directional force values, the torque values in three directions are also acquired, allowing for the real-time calculation of the force center position on the force platform. This enables the analysis of more motion mechanics characteristics.
The traditional internationally renowned three-dimensional force platform is composed of two types of sensors: piezoelectric sensors or strain gauges. The force measurement platform composed of piezoelectric sensors has a short data collection duration and cannot display data in real-time; it can only be processed and viewed after training and centralized data processing. Therefore, this technology employs a strain gauge force sensor. Can be displayed in real-time for extended periods and collect training data at any time. Data collection duration is unlimited. Our company, in partnership with strong domestic research institutions, has jointly tackled key projects. Our achievements have been involved in the technical testing for the Olympic science and technology preparation of some national teams.
Tossing Six-Axis Force Platform ( Dimensions1: 1)
The six-axis force platform, based on 3 Assembled from a set of force measurement components, integrated with3x4 A six-component multi-axis stress sensor.EachSix-Axis Force GaugeUnitTaiwan, by4Comprised of various models of six-axis force sensors, resolving interference between different sensors is a complex technical challenge. Calibration of each six-axis sensor requires an extremely meticulous process.ProfessionalCalibration equipment adjustment complete. Its technical difficulty far exceeds the 3D force platform.
A throw-down six-axis force platform can measure three components of force in real-time with high precision, relative to the contact surface of the platform. Fy 、Fx 、Fz And3 Torque in one directionMY、MX、MZThe integrated embedded high-precision measurement and analysis system can display and analyze the output signals of multiple modular force platform combinations in real-time, calculating eachA six-axis forceForce MeasurementUnitOutput 3 Quantity and force3 A directional rotational torque is applied, thereby obtaining core test data such as the instantaneous center of gravity, resultant force, resultant force angle, step frequency, and step distance acting on the combined force measurement system of the test object. The analysis software can conduct offline comparative analysis of test historical data and provide corresponding test conclusions. Suitable for shot put, discus, and hammer throw events (with different diameter rings) and compatible with motion capture systems, allowing for synchronized collection and analysis with electromyography systems.
Additionally, a modular six-axis force platform is available for customization to different sizes based on customer requirements. zuiThe small modular size is 500×150mm For balancing and precision studies.zuiLarge modular single blocks can achieve1x1mUsed for connecting digital walkways or tracks, accuracy is significantly higher than that of internationally renowned brands after comparative testing. Force measurement units can be used in parallel, enabling the simultaneous collection of walking data for multiple steps.。
Service WeChat:simisimisimi ServiceEmail:hamyzz@126.com
Product name: HAM six-dimensional force measuring table
Different from the traditional three-dimensional force measuring table, the six-dimensional force measuring technology is to measure the force values in three directions XYZ and obtain the torque values in three directions at the same time, so that the force center position of the output table can be calculated in real time, and more motion mechanical characteristics can be analyzed.
The traditional internationally renowned three-dimensional force measuring table consists of two types of sensors: piezoelectric sensor or strain sensor. The collection time of the force measuring table composed of piezoelectric sensors can not display the data in real time, but can only be seen after the centralized data processing after training. Therefore, this technology uses a strain gauge force sensor, which can be displayed in real time for a long time, collect training data at any time, and the data collection time is unlimited. Our company and domestic strong scientific research units jointly tackle key problems, and the results have participated in the technical test of some national Olympic science and technology preparation.
Throwing six-dimensional force table (size 1:1)
The six-dimensional force measuring table, based on 3 sets of force measuring components splicing, integrated 3x4 six-component multidimensional stress sensors, each six-dimensional force measuring unit table, composed of 4 different models of six-dimensional force sensors, to solve the interference between different sensors is a complex technical problem, calibration of each six-dimensional sensor, Need to go through a very professional calibration instrument debugging. Its technical difficulty is much greater than that of the three-dimensional force measuring table.
The throwing six-dimensional force measuring table can measure the three-component force Fy, Fx, Fz and the rotating torque MY, MX and MZ in three directions relative to the contact surface of the force measuring table in real time and with high precision. The integrated embedded high-precision measurement and analysis system can display and analyze the output signals of multiple modular force measuring tables collected in real time, and calculate the output force of 3 components and rotating torque in 3 directions of each six-dimensional force measuring unit. Then the core test data such as instantaneous center of gravity, resultant force, resultant force Angle, step frequency and step distance of the test object acting on the combined force measuring system are obtained. The analysis software can compare and analyze the historical test data offline, and give the corresponding test conclusion. Can be used for shot hammer and discus projects (outer rings of different diameters) can be compatible with motion capture system, myoelectric system synchronous acquisition and analysis.
In addition, the modular six-dimensional force measuring table can be customized according to user needs of different sizes, the minimum modular size is 500×150mm, for balance and other accurate research. The maximum modular block can reach 1x1m for splicing digital trails or racetracks, and the accuracy is significantly higher than that of well-known foreign brands after comparison and test. The force table unit can be used in parallel to measure the data of multiple walks at one time.
