Shandong Zhongjie Special Equipment Co., Ltd. (formerly Heze Boiler Factory Co., Ltd.) holds an A-grade boiler manufacturing license, an A2-grade pressure vessel manufacturing license, an A2-grade pressure vessel design license, B-grade boiler installation license, and GB2/Class and GC2/Class pressure pipeline installation licenses, as well as an equipment and machinery installation contracting qualification. It is a member of the China Boiler and Water Treatment Association, the China Chemical Equipment Association, and the Council Member of the Shandong Equipment Manufacturing Association. The company has also passed certifications for the ISO9001 Quality Management System, ISO14001 Environmental Management System, OHSAS18001 Occupational Health and Safety Management System, and the U.S. ASME/U2 certification.
If a gas boiler gas leak is detected, immediate action must be taken to address it: 1. Immediately shut off the gas supply: First, quickly close the gas supply valve to cut off the gas flow. This prevents further leakage and reduces safety risks. 2. Ventilate: Open windows and doors to ensure proper indoor air circulation and expel any remaining gas. This lowers the indoor gas concentration, reducing the risk of explosion and poisoning. 3. Avoid open flames and electrical appliances: In the event of a gas leak, avoid using open flames and electrical equipment to prevent fire or electrical sparks that could trigger an explosion. 4. Do not operate electrical switches: Do not operate electrical switches, including lights, TVs, computers, etc., to prevent the generation of sparks that could cause an accident. 5. Contact the gas company or personnel: Promptly contact the local gas company or personnel to report the gas leak situation and request their inspection and repair. 6. Do not use a phone or make calls: In cases of suspected gas leaks, do not use a phone or make calls to prevent static electricity from causing an explosion. 7. Stay away from the leak area: Keep a safe distance from the leak area to ensure personal safety. Avoid approaching the gas boiler and the leak point to prevent injury. Remember, dealing with a gas boiler gas leak is a dangerous task that requires caution. It is best handled by trained personnel to ensure safety.

When selecting a thermal oil heater for the rubber industry, pay attention to the following aspects: - Temperature Requirement: Determine the required operating temperature range based on the rubber industry's process needs. Ensure the heater can consistently provide the necessary operating temperature. - Heat Load: Calculate the required heat load based on the rubber industry's production scale and process requirements. Choose a thermal oil heater that can meet the industry's heat load needs. - Thermal Efficiency: The thermal efficiency of the thermal oil heater directly impacts energy consumption and operating costs. Choose a heater with high thermal efficiency for energy-saving purposes. - Safety: The safety of the thermal oil heater is crucial. Select a heater with comprehensive safety protection devices and an automatic control system to ensure safe and reliable operation. - Maintenance: Proper maintenance is essential for extending the heater's lifespan and ensuring normal operation. Choose a heater that is easy to maintain and cost-effective in maintenance. - Manufacturer Reputation: Choose a reputable thermal oil heater manufacturer with extensive experience to ensure product quality and reliable after-sales service. - Cost-Effectiveness: Consider the cost, energy consumption, and maintenance costs of the thermal oil heater to select a product with good cost-effectiveness. - Consult and communicate with heating equipment suppliers or engineers when purchasing a thermal oil heater, choose based on specific needs, and adhere to relevant industry standards and specifications.

Fuel and gas boiler combustion safety and explosion-proofing are crucial. The following are some related safety measures: Burner selection and adjustment: Choose burners that meet standards and specifications, and ensure they are installed correctly. The burner's parameters and adjustments should comply with design requirements to ensure a stable and safe combustion process. Fuel supply system: The fuel supply system of fuel and gas boilers should have safe and reliable characteristics. Equipment such as fuel storage tanks, conveying pipelines, and filters should be inspected and maintained regularly to prevent leaks and blockages. Combustion control system: The combustion control system of fuel and gas boilers should have the capability to control. The control system should be able to monitor and adjust combustion parameters, such as fuel supply volume and combustion air flow, to ensure a stable and safe combustion process. Safety valves and pressure switches: Safety valves and pressure switches should be installed on fuel and gas boilers to protect their safe operation. Safety valves can automatically open when the pressure exceeds the set value, releasing overpressure gas or steam to prevent boiler explosion. Gas leak detection: For gas boilers, gas leak detection devices should be installed. These devices can detect gas leaks in a timely manner and trigger alarms to prevent gas accumulation and explosion. Regular inspections and maintenance: Regularly inspect and maintain fuel and gas boilers, including cleaning burners, checking the combustion system, and adjusting combustion parameters. Promptly repair and replace damaged components to ensure the normal operation and safety performance of the equipment. Training and operating procedures: Train operators to...

In the burner of a thermal oil furnace, adjusting the air door in low flame conditions is crucial. Here are some common knowledge and precautions: The role of the air door: The air door is a key component in the burner that controls the supply of combustion air. By adjusting the opening of the air door, the flow of combustion air can be controlled, thereby influencing the oxygen supply and combustion effect during the combustion process. Adjustment in low flame conditions: In low flame conditions, the burner needs to maintain a stable combustion to ensure combustion efficiency and heat output. In this case, it is necessary to adjust the opening of the air door appropriately to maintain an adequate supply of combustion air. Generally, the opening of the air door is relatively small during low flame to maintain an appropriate oxygen supply, avoiding incomplete combustion or instability. Ratio of combustion air to fuel: In low flame conditions, it is necessary to ensure the appropriate ratio of combustion air to fuel. Too much combustion air leads to incomplete combustion and energy waste, while too little combustion air can cause instability in combustion and the production of harmful gases. By adjusting the opening of the air door, the ratio of combustion air to fuel can be controlled to achieve a stable combustion effect. Burner adjustment and optimization: During the installation and adjustment of the burner in the thermal oil furnace, appropriate adjustment and optimization are required. Through actual operation and monitoring, adjust the opening of the air door and other parameters to achieve the best combustion effect and energy efficiency performance. This requires...
Our company attaches great importance to technological innovation and R&D design. We have one municipal-level enterprise technology center in Heze City, equipped with non-destructive testing, physical and chemical testing, welding testing, hydrostatic testing, and other testing facilities. We have over 600 types of equipment, including CNC machine tools, X-ray flaw detectors, digital ultrasonic flaw detectors, mechanical property testing machines, chemical analyzers, spectrometers, tensile testing machines, plasma welding machines, etc. The key products and technologies we have developed, such as temperature and pressure vessel welding, biomass boiler emission reduction, and waste heat utilization, have successively been included in multiple Shandong Provincial Department of Industry and Information Technology science and technology innovation projects, Shandong key projects, and Heze City innovation and excellence projects. We have cumulatively obtained 27 authorized utility models, 16 authorized inventions, participated in drafting 2 standards, 2 industry standards, and registered 15 trademarks. The deep cryogenic vessel processing technology jointly developed by our technical team and Professor Yajiang Li from Shandong University, using the international plasma arc + filler wire argon arc welding (PAW-GTAW) technology, has been appraised as reaching international standards in the field of deep cryogenic vessel manufacturing at the provincial level.
Choose ZJET for excellence, let's create brilliance together!