JY7206 Series Drill Tools Thread Lubricant JY7206 Grease for drilling tool thread
Product Description Description
This product is thickened with a soap base thickener and mineral oil or semi-synthetic oil, mixed with solid fillers. Complies withAPI RP 7A1Please provide the Chinese content you would like translated.SY-T5198-1996Standard.
This product is made by thickening mineral oil or semi-synthetic oil with soap-based thickener and adding solid fillers. Comply with API RP 7A1 and SY-T5198-1996 standards.
Performance Features Performance characteristics
Excellent high-temperature resistance, wear resistance, extreme pressure resistance, medium resistance, anti-sticking, and sealing properties.
Good high temperature resistance, anti-wear, extreme pressure, medium resistance, anti-sticking and sealing properties.
Typical Data Typical data
Analyze Project Item | Quality Specifications Quality Index
| Test Method Test method | |
A | B | ||
Appearance Appearance | Charcoal green uniform oil paste Gray green uniform ointment | Estimated Visual inspection | |
Penetration Depth,0.1mm Cone penetration, 0.1mm | 290~350 | GB/T269 | |
Evaporation Rate(150℃,1h),(m/m) Not less than Evaporation degree (150℃, 1h), (m/m) ≥ | 4.0 | 10.0 | GB/T0337 |
Corrosion45#Steel,100℃,3h） Corrosion (45# steel, 100℃, 3h) | Qualified | SH/T0331 | |
Water Filtration65℃，2h）/% Water leaching (65℃, 2h)/% | ≤5 | ||
Coating Performance Painting performance | Not less than-20℃(Standard), Not Less Than-40High Altitude Cold ≥-20℃(normal), ≥-40(high cold) | ||
Similar Viscosity(10S-1),Pa.S Not greater than Similar viscosity (10S-1), Pa.S ≤ | 1000(-10℃) | 2200(-30℃) | SH/T 0048 |
App Recommendations Application
Sealants and lubricants for threaded components of drill collars and drill rods used in oil and gas fields and geological exploration drilling. Effective under high temperature, high load, and high torque stress conditions, they prevent mud leakage, minimize thread damage and galling, and ensure easy disassembly and cleaning.AType suitable for-20～200℃，BType suitable for-40～200℃。
It is suitable for sealing and lubrication of drill collars and drill pipe assembly threads used in oil and gas fields and geological exploration drilling. Under the conditions of high temperature, high load and large torque stress, it can prevent mud leakage, avoid thread scratches and sticking, and is easy to disassemble and clean. Type A is suitable for -20~200℃, and type B is suitable for -40~200℃.
Packaging Style Packing
20LPlastic drums or packed as per customer's requirement
20L plastic barrel or packaged according to user requirements
Cautionary Notes Precautions
Before coating, the threaded joint area should be cleaned with kerosene or other solvent, and then dried naturally or with air.
Before coating, the threaded joints should be cleaned with kerosene or other solvents and dried or blown dry.
