Shandong Zhongjie Special Equipment specializes in: fuel (gas) boilers, organic heat carrier boilers, biomass boilers, waste heat recovery boilers, and other boiler products; vacuum insulated cryogenic pressure vessels such as LNG tanks, oxygen/nitrogen/argon tanks, and CO2 tanks; pressure vessel products including denitrification engineering equipment, heat storage and energy storage equipment, and complete chemical equipment sets; central air conditioning and HVAC equipment such as ground (water) source heat pumps, air source units, water-cooled screw units, and air-cooled modular units. Planned products include large-scale energy centers, LNG transport vehicles, LNG tank containers, and other green energy equipment.
Adjusting the combustion of biomass boilers can be carried out through the following steps:
Determine combustion parameters: Based on the design of the biomass boiler and the characteristics of the fuel, establish appropriate combustion parameters including combustion temperature, oxygen supply, and fuel supply rate.
Adjust combustion temperature: Adjust the combustion temperature based on the fuel characteristics and combustion requirements. Excessive combustion temperature may lead to overburning of fuel and energy waste, while insufficient combustion temperature may result in incomplete combustion and increased emissions.
Regulate Oxygen Supply: Adjust the oxygen supply based on the oxygen content during the combustion process. Excessive oxygen supply may result in incomplete fuel combustion and energy waste, while insufficient oxygen supply can lead to incomplete combustion and increased emissions.
Adjust fuel supply rate: Adjust the fuel supply rate based on thermal load and fuel characteristics. Excessive fuel supply rate may lead to overburning and energy waste, while an insufficient fuel supply rate may result in incomplete combustion and inadequate heating.
Monitor and Adjust: By monitoring key parameters during the combustion process, such as combustion temperature, oxygen content, flue gas composition, etc., adjust combustion parameters promptly to ensure the stability of the combustion process.
Note: Adjusting the combustion of biomass boilers requires consideration of specific pot...

Before considering the use of biomass boilers, the following preliminary analyses should be conducted:
Fuel Supply: Biomass boilers require biomass fuel, such as wood chips, straw, etc. Before selecting a biomass boiler, it is essential to ensure a stable fuel supply channel, including procurement, storage, and transportation of the fuel.
Fuel Costs: The cost of biomass fuel may be affected by factors such as season, region, and crop yields. Before selecting a biomass boiler, it's necessary to evaluate the fuel costs to ensure its economic feasibility.
Boiler Requirements: Evaluate the necessary heat output and heating area based on actual needs. This will aid in determining the appropriate scale and model of biomass boiler required.
Technical Requirements: The installation and operation of biomass boilers require certain technical specifications. Before selecting a biomass boiler, it is necessary to assess your technical capabilities and resources to ensure they meet the requirements for installation, commissioning, and maintenance.
Environmental Requirements: Biomass boilers have lower carbon emissions and environmental impact compared to traditional coal-fired boilers. However, local environmental regulations and emission standards must be considered to ensure compliance with the requirements when using biomass boilers.
Economic Benefits: Besides fuel costs, the economic benefits of biomass boilers should also be considered comprehensively. This includes factors such as the purchase cost of the boiler, operation and maintenance costs, and energy-saving benefits.
An integrated analysis can effectively assess the applicability and feasibility of biomass boilers, thereby enabling informed decision-making.

A biomass organic heat carrier boiler is a boiler equipment that uses biomass as fuel to transfer heat energy through organic heat carriers. Compared to traditional steam boilers, the biomass organic heat carrier boiler has the following performance advantages:
High thermal efficiency: The biomass organic heat carrier boiler uses organic heat carriers as the heat transfer medium, offering high heat transfer efficiency. Organic heat carriers can achieve liquid-phase heat transfer at low temperatures, resulting in minimal heat loss and enabling more efficient utilization of fuel's thermal energy, thereby enhancing thermal efficiency.
Flexibility: The biomass organic heat carrier boiler is suitable for various biomass fuels, such as wood chips, straw, etc. Due to the abundance of biomass resources, different biomass fuels can be chosen based on actual conditions, enhancing the substitutability and flexibility of the fuel.
Environmental Protection: The biomass organic heat carrier boiler produces relatively little waste gas and slag during the combustion process, with low emissions of pollutants. The biomass fuel itself has low sulfur and low nitrogen characteristics, and the slag after combustion can be reused as organic fertilizer or biomass fuel, reducing environmental pollution.
Safety: The biomass organic heat carrier boiler uses an organic heat carrier as the heat transfer medium, featuring lower operating pressure, which reduces safety risks during the boiler's operation. Additionally, compared to fossil fuels, biomass fuel has a lower risk of explosion and fire during combustion.
Renewability: Biomass organic heat carrier boilers use biomass as fuel, a resource that is renewable and can be continually replenished through cultivation. Compared to fossil fuels, the use of biomass fuel has a smaller environmental impact, benefiting sustainable development.

Fully automatic biomass boiler systems commonly use a make-up water pump for pressure maintenance, which is a typical water supply method. The specific working principle is as follows:
Make-up Water Pump: The fully automatic biomass boiler is equipped with a make-up water pump, which is used to pump water from the water source (such as a water tank or municipal water supply) into the boiler's water supply system.
Pressure Regulation: The feed water pump operates on a constant pressure system, which involves installing a pressure sensor or controller in the boiler water supply system to monitor the pressure. When the pressure in the water supply system falls below the set value, the feed water pump automatically starts to replenish water into the system, thereby increasing the system pressure.
Pressure Control: The feed pump will control the pressure based on the set range. When the system pressure reaches the set value, the feed pump will cease operation to prevent excessive pressure.
Automation Control: The water supply system of an automatic biomass boiler is typically equipped with an automated control system that can intelligently manage based on the boiler's operating status and needs. For instance, when the boiler requires water replenishment, the control system automatically activates the feedwater pump to ensure the stable operation of the water supply system.
By utilizing a constant pressure supply pump method, the fully automatic biomass boiler can achieve automated control of the water supply system and stable water supply, ensuring the normal operation and safety of the boiler. This method can be adjusted and optimized according to actual needs, enhancing water supply and energy utilization efficiency.
ZJ Special Equipment adheres to the grand vision of "realizing employees' dreams, creating customer value, and striving for the prosperity and strength of our motherland," focusing solely on the development of green energy equipment. We dedicate high-value products and services to society!