Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Development Zone, Heze City, with a registered capital of 50 million yuan and total assets of 500 million yuan. The company has 7 business centers: boilers, deep-freeze containers, pressure vessels, central air conditioning, engineering installation, international trade, and the Internet of Things. It has three factory sites on Jinnan Road, East Yangtze Road, and Bohai Road, covering a total area of 200,000 square meters, with the main workshop spanning 83,000 square meters. It currently employs 710 people, including 247 engineers and technicians, and 82 intermediate-level technicians. It was recognized as a "High-tech Enterprise" by the Science and Technology Department in December 2016, named a "Specialized and New Enterprise of Shandong Province" by the Department of Industry and Information Technology in June 2021, identified as a "Shandong Gazelle Enterprise" in June 2022, and recognized as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology in August 2022.
To prevent the problem of slagging in biomass boilers, the following measures can be taken:
Choose the right fuel: Opt for biomass fuel with good quality and moderate humidity, avoiding fuel that is overly wet or contains excessive impurities, as this helps reduce the risk of coking.
Regulate Fuel Supply Speed: Control the rate of fuel supply to avoid too fast or too slow feeding, ensuring complete combustion of fuel and minimizing the risk of carbon buildup.
Maintain an appropriate combustion temperature: Keep the combustion temperature at an appropriate level to avoid both too low and too high temperatures. Too low temperatures can lead to coking, while too high temperatures may cause incomplete combustion.
Regulate Air Supply: Properly control the air supply volume to ensure complete fuel combustion, avoiding excessive air entry into the combustion chamber to reduce the risk of slagging.
Regular cleaning and maintenance: Regularly clean the ash and carbon deposits in the combustion chamber to maintain the boiler's cleanliness and prevent coking issues.
Install coking monitoring device: Install a coking monitoring device to monitor the coking situation inside the combustion chamber in real-time, and take timely measures to address it, preventing further development of coking issues.
Above are some common measures to prevent biomass boiler slagging, with specific preventive measures needing to be adjusted and optimized based on the specific conditions and operational requirements of the boiler.

Biomass boilers typically include the following main equipment:
Combustion chamber: The area used for burning biomass fuel, providing the space and oxygen required for combustion.
Grate: A metal grid located at the bottom of the combustion chamber, used to support fuel and facilitate the flow of gases and slag during the combustion process.
Combustion System: Includes fuel supply system, air supply system, and ignition system, designed for controlling the supply of fuel and air to achieve the combustion process.
Flue Gas Treatment System: Comprising flue gas purification equipment such as dust collectors, desulfurization and denitrification units, designed to purify flue gases produced by combustion and reduce environmental pollution.
Boiler pipeline system: Includes water pipes, steam pipes, and flue gas pipes, used for transmitting heat and flue gas.
Heat Exchanger: Used to transfer the heat generated by combustion to the working medium, such as water or steam, to achieve energy conversion.
Control System: Includes automatic control equipment, sensors, and instruments for monitoring and controlling the boiler's operational status, ensuring safety and performance.
Equipment: Includes water supply system, wastewater system, slag handling system, and fuel storage system, etc., to provide the necessary functions for boiler operation.
These units collectively form the basic structure of biomass boilers, achieving the combustion of biomass fuel and the energy conversion process. The specific units and configurations may vary depending on the type, scale, and application requirements of the boiler.

When installing biomass boilers, the following aspects should be taken into consideration:
Safety Distance: Biomass boilers should maintain adequate safety distances from other equipment, buildings, etc., to prevent fires and safety accidents.
Ventilation and Exhaust: Biomass boilers require an effective ventilation and exhaust system to ensure that flue gases produced during the combustion process are promptly discharged, preventing accumulation indoors and posing health risks.
Fuel Storage: Biomass boilers require appropriate fuel storage facilities, such as fuel silos or storage areas. The fuel storage area should be dry, well-ventilated, and fire prevention measures should be in place to prevent spontaneous combustion and fires.
Pipe Connections: The pipe connections for biomass boilers must be sturdy and reliable to ensure normal operation of fuel supply, flue gas排放, and water circulation. Suitable sealing materials should be used at the pipe connection points to prevent leaks and energy loss.
Control System: The control system for biomass boilers should be reliable and stable, capable of accurately controlling and adjusting parameters such as temperature, pressure, and fuel supply. The control system should be equipped with safety protection features, such as overheat protection and low water level protection.
Regular Maintenance: Biomass boilers require regular maintenance and care, including cleaning the combustion chamber, inspecting pipes and valves, and clearing the flue and dust removal equipment. Regular maintenance ensures the normal operation and combustion of biomass boilers.
Compliance Requirements: When installing biomass boilers, relevant laws, regulations, and standards must be adhered to, such as safety production regulations and environmental protection requirements. Ensure that the installation of biomass boilers complies with standards to guarantee safety and environmental protection.
Above are some precautions to be taken when installing biomass boilers to ensure safe and environmentally friendly operation. During the installation process, be

Biomass boilers feature the following characteristics:
Renewable Energy: Biomass boilers utilize biomass fuels such as wood chips, straw, etc., which are renewable. Compared to traditional fossil fuels, these fuels offer lower carbon emissions and are more environmentally friendly.
Diverse fuel options: Biomass boilers are suitable for various biomass fuels, such as wood chips, straw, and husks, demonstrating strong fuel adaptability. This allows biomass boilers to be widely used in different regions and industries.
Energy Utilization: Biomass boilers employ advanced combustion technology and heat recovery systems, achieving high energy utilization efficiency. By optimizing the combustion process and heat recovery, energy utilization efficiency can be maximized and energy consumption minimized.
Flexible operation modes: Biomass boilers can be operated flexibly according to actual needs, such as manual control, automatic control, or remote monitoring, etc. This allows biomass boilers to meet requirements in various scenarios and provide a stable energy supply.
Superior environmental performance: Biomass boilers produce relatively fewer emissions during combustion, with a smaller environmental impact. Through reasonable combustion control and flue gas treatment devices, the emission content can be further reduced to meet higher environmental protection standards.
Wide Application Range: Biomass boilers are extensively used in industries, agriculture, greenhouses, HVAC, and other fields. They provide a stable energy supply to meet the needs of various industries and sectors.
In summary, biomass boilers feature renewable energy, diverse fuel options, efficient energy utilization, flexible operation modes, superior environmental performance, and wide applicability, making them a sustainable and eco-friendly thermal energy supply solution.
Shandong Zhongjie Special Equipment, welcome customers to our factory for business discussions.