Operating Principle
● As the water to be filtered enters the filter housing through the inlet, impurities are trapped inside the filter core. After filtration, the clean water exits through the outlet. With the increase in filtration time, impurities accumulate more inside the filter core. When the pressure difference between the inlet and outlet of the filter reaches the set value (adjustable), the filter begins automatic cleaning.
The entire cleaning process consists of two steps: 1) Open the automatic drain valve on the filter; 2) The motor drives the cleaning brush inside the filter core, performing an axial cleaning of the core, with impurities being brushed off and flushed out through the filter's drain port.
The entire cleaning process is continuously flowing, with the entire operation of the fully automatic brush-type self-cleaning filter controlled by a randomly equipped intelligent control box. Control methods include differential pressure, time, manual, and PLC control.
Product Features
● Non-stop filtration: Open the drain valve during cleaning, with a drain water volume of 5% of the filtered water volume. Cleaning time is 15-60 seconds, with the inlet flowing normally without interruption.
Wide filtration accuracy: Normally select between 100um to 2000um, thoroughly cleaned.
● Large Effective Filtration Area: Standard filter mesh has an effective filtration area 8 times greater than the inlet area, with low pressure drop.
● Wash Reliability: Offers various control methods including manual, differential pressure, time, and PLC program logic control.
● Simple installation: Diverse structural types available, including vertical, horizontal, and Y-shaped, suitable for various pipeline installation conditions on-site.
Long-lasting lifespan: Designed for over 10 years of normal use, with low cost for regular maintenance and manual operation.
Comprehensive Parameters
Flow Rate Applicable: 5-5000 m³/h
Please contact our factory for specific model selection, as the corresponding flow rate varies with different water quality and accuracy.
● Operating Pressure Range: 0.2~2.0 MPa; Higher working pressure available for custom orders.
Filter Area: 2,700 - 50,000 cm²
● Diameter for Import/Export: 50, 80, 100, 125, 150, 200, 250, 300, 350, 400, 500, 600, 700mm
● Suitable working temperature: 0~80°C; Please specify if above this temperature.
Washing Parameters:
Waste gate: DN25, DN50, DN80
● Cleaning Time: 30-60 seconds
● Water consumption per wash: ≤5%
Electrical control parameters:
● Voltage Control: 24V; Optional 10V or 24V DC as required
● Rated Operating Voltage: 3 Phase, 220/380V (as required)
● Current: 1.5-2A
Motor Power: 0.35KW, 0.55KW, 0.75KW, 1.1KW
Material Parameters:
Filter Body: Carbon steel coated with epoxy resin paint, 304, 316L, 2205
● Filter: 304, 316L wedge-shaped filter element; 304, 316L woven mesh
● Washing Equipment: 304, 316L, POM
● Drain valve: Carbon steel, 304, 316L
● Sealing Ring: Synthetic Rubber, Polytetrafluoroethylene (PTFE)
Filter Mesh Accuracy:
● Wedge-shaped filter element precision: 100, 200, 300, 500, 1000 um
● Woven Filter Mesh Precision: 25, 50, 100, 200, 300, 500 um
